Skip to content
TapBuff

Town of Brookfield San Dist 4

EPA’s and Wisconsin’s records have results for 37 contaminants in its water; 7 were found.

Serves 6,419 people · Groundwater · Brookfield, WI · Hardness: very hard

Serves
6,419 people
Connections
2,377
Water source
Groundwater
Based in
Brookfield, WI
County
Waukesha
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

53045, 53186

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 28 to Nov. 19, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2002 to 2023.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride, chromium (total) and nitrate: Wisconsin’s own results, samples taken from Aug. 11, 2020 to July 21, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. One other PFAS with no federal limit was found, the highest PFBA at 6.3 ppt: see it below.

Below EPA’s limits, 6 results

Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 42.5 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 19 ppb · Forms or is added in treatment

Averaged by year, the highest was 42.5 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 37.9 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lead, Action level 15 ppb · health goal zero; 90th percentile 3.4 ppb

90th percentile, 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 3.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 10.1 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 7.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 10.1 ppb, in 2021, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.6 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.5 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.5 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.84 ppb. In 2026, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.7 ppb, in 2014.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.2 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.18 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.2 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.25 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.21 ppm, in 2017.

What handles it

About fluoride
PFBS, Health benchmark 2,000 ppt; highest 7.1 ppt

Highest sample, May 28, 2025; found in 1 of 6 · Comes from the source

The highest sample was 7.1 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 6 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 6 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 6 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 6 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 6 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits7.1 ppt highest, found in 1 of 6 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Wisconsin utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA6.3 ppt1 of 6None covers it
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Nitrate

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Very hard, typically 535 mg/L (31.3 grains per gallon), across 3 sampling points, 2017 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Town of Brookfield San Dist 4 reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride, chromium (total) and nitrate results here are Wisconsin’s own from 2020 on, with EPA’s national file for 2012 to 2019. Town of Brookfield San Dist 4’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 28 to Nov. 19, 2025; Wisconsin’s results run from Aug. 11, 2020 to July 21, 2026.

Testing your own tap

Town of Brookfield San Dist 4’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Wisconsin certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Town of Brookfield San Dist 4’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 3.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Wisconsin certifies closest to the area Town of Brookfield San Dist 4 serves, or a kit by mail

The 3 labs Wisconsin certifies closest to the area Town of Brookfield San Dist 4 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Waukesha Co Dept of Parks & Land Use – DEH

    Waukesha, WI · about 6 miles

    Certified for bacteria, nitrate

    (262) 896-8300

  • Eurofins S-F Analytical Laboratories Inc.

    New Berlin, WI · about 6 miles

    Certified for bacteria, nitrate, lead and copper, metals

    (262) 727-6006

  • M M S D Lab Services Central Lab

    Milwaukee, WI · about 13 miles

    Certified for bacteria

    (414) 277-6377

All 156 certified labs for Wisconsin⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Wisconsin certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Wisconsin’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WI2680239. Rebuilt from EPA data on Oct. 25, 2026.