Reedsburg Waterworks
EPA’s and Wisconsin’s records have results for 38 contaminants in its water; 7 were found.
Serves 9,984 people · Groundwater · Reedsburg, WI · Hardness: varies by source
- Serves
- 9,984 people
- Connections
- 3,697
- Water source
- Groundwater
- Based in
- Reedsburg, WI
- County
- Sauk
- Owner
- Local government
- Hardness
- Varies by source
The ZIP code it serves
The short answer
Haloacetic acids (HAA5) averaged above its legal limit’s level in 2025, with no violation recorded. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from June 20 to Dec. 19, 2023.
Haloacetic acids (HAA5), nitrate, fluoride, total trihalomethanes (TTHM), arsenic and chromium (total): Wisconsin’s own results, samples taken from Jan. 13, 2020 to Sept. 8, 2026, with EPA’s 2012 to 2019 file for earlier years.
Uranium: EPA’s compliance monitoring file, samples taken from May 24, 2017 to May 24, 2017. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.
About PFAS certifications
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Above the limit’s level, no violation recorded, 1 result
Haloacetic acids (HAA5)
Forms or is added in treatment
What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health.
68.5 ppb
Highest yearly average, 2020 to 2026
2026 average: 6.8 ppb
Averaged by year, the highest was 68.5 ppb, in 2025, above EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its two samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.
How it’s judged
EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 6.9 ppb, in 2016.
What handles it
No certification claim covers this compound yet.
Below EPA’s limits, 6 results
Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 4.8 ppm
Highest sample; found in 35 of 35 · 2026 average: 3.6 ppm · Comes from the source
The highest sample, in 2020, was 4.8 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its five samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 4.7 ppm, in 2019.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
PFHxS, EPA’s 2029 limit 10 ppt; highest 4.4 ppt
Highest sample, Dec. 19, 2023; found in 2 of 10 · Comes from the source
The highest sample was 4.4 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.72 ppm
Highest yearly average, 2020 to 2026 · 2026 average: 0.63 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.72 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.98 ppm. In 2026, the latest year on file, its 23 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.37 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 10.4 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 1.6 ppb · Forms or is added in treatment
Averaged by year, the highest was 10.4 ppb, in 2025, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 5.9 ppb, in 2014.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.6 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 0.56 ppb · Comes from the source
Averaged by year, the highest was 0.6 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.0 ppb. In 2026, the latest year on file, its five samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.11 ppb
Highest yearly average, 2017 · Comes from the source
Averaged by year, the highest was 0.11 ppb, in 2017, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.18 ppb. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Not foundNot found in any of 10 samples, below 4 ppt |
| PFOS | 4.0 ppt | Not foundNot found in any of 10 samples, below 4 ppt |
| PFHxS | 10 ppt | Below EPA’s limits4.4 ppt highest, found in 2 of 10 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 10 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 10 samples, below 5 ppt |
| PFBS | Index only | Not foundNot found in any of 10 samples, below 3 ppt |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Doesn’t applyDoesn’t apply: no sampling location found two or more of the four |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
31 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Chromium (total)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claim: Arsenic (Pentavalent)<=50 ppb Reduction
For: Arsenic
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium
For: Arsenic, Uranium
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for: Arsenic
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Arsenic
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for: Arsenic
One more filter
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Arsenic
Hardness
Moderately hard to very hard depending on the source, 114 to 224 mg/L (6.6 to 13.1 grains per gallon), across 5 sampling points, 2017 to 2026.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Reedsburg Waterworks reported disinfecting with chlorine, not chloramine, at all 5 of its sampling points, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Haloacetic acids (HAA5), nitrate, fluoride, total trihalomethanes (TTHM), arsenic and chromium (total) results here are Wisconsin’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Reedsburg Waterworks’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 20 to Dec. 19, 2023; Wisconsin’s results run from Jan. 13, 2020 to Sept. 8, 2026; EPA’s compliance samples are from May 24 to 24, 2017.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Reedsburg Waterworks’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Reedsburg Waterworks’s results flag: haloacetic acids (HAA5). It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Wisconsin certifies closest to the area Reedsburg Waterworks serves, or a kit by mail
The 3 labs Wisconsin certifies closest to the area Reedsburg Waterworks serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Pure Water Labs, LLC
Reedsburg, WI · under a mile
Certified for bacteria
Pure Water Labs, LLC
Lodi, WI · under a mile
Certified for bacteria
CT Laboratories
Baraboo, WI · about 14 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Wisconsin certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Wisconsin’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on haloacetic acids (HAA5)What it does to health, where it comes from, and the certification claim that addresses it.About haloacetic acids (HAA5)
- Get the utility’s own reportReedsburg Waterworks must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Wisconsin Department of Natural Resources, Drinking Water Program, results from Jan. 2, 2020 to Oct. 5, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Wisconsin DNR and DATCP, certified and approved drinking water laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Wisconsin Department of Natural Resources, Drinking Water Program, results from May 24, 2017 to March 19, 2026, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID WI1570102. Rebuilt from EPA data on Oct. 25, 2026.