Skip to content
TapBuff
ZIP

New Holstein Waterworks

What EPA’s and Wisconsin’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
3,012 people
Connections
1,371
Water source
Groundwater
Based in
New Holstein, WI
County
Calumet
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

53061, 53079

The short answer

2 results are above the health goal. The worst: Lead, above the health goal. 1 health-based violation since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2018 to 2023.

Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic and chromium (total): Wisconsin’s own results, samples taken from Jan. 8, 2020 to Sept. 8, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from June 20, 2014 to June 20, 2014. Newer results are in the utility’s annual water quality report.

Above the health goal2

Lead

Comes from pipes, often your own

Above the health goal

3.1ppb

90th percentile, 2023

In the latest period, 9 in 10 homes sampled were at or below 3.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Uranium

Comes from the source

Above the health goal

0.83ppb

Highest yearly average, 2014

Averaged by year, the highest was 0.83 ppb, in 2014: below EPA’s legal limit of 30 ppb, but above its health goal of zero. Its highest single sample was 0.91 ppb. That is the only year on file.

What handles it

Below EPA’s limits4

Nitrate

Comes from the source

Below EPA’s limits

9.5ppm

Highest sample; found in 88 of 88

2026 average: 6.4 ppm

The highest sample, in 2021, was 9.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 12 samples averaged 6.4 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 9.1 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

20.2ppb

Highest yearly average, 2020 to 2026

2026, one sample: 18.8 ppb

Averaged by year, the highest was 20.2 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was 18.8 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 17.2 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.71ppm

Highest yearly average, 2020 to 2026

2026: not found

Averaged by year, the highest was 0.71 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.89 ppm. In 2026, the latest year on file, it wasn’t found in any of its three samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.47 ppm, in 2012.

What handles it

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

6.9ppb

Highest yearly average, 2020 to 2026

2026, one sample: 5.9 ppb

Averaged by year, the highest was 6.9 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its one sample was 5.9 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 8.5 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Hardness

Very hard, typically 371 mg/L (21.7 grains per gallon), across 4 sampling points, 2017 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 21.7 grains per gallon, salt includedSoftener or salt-free conditioner?Wisconsin water hardness, utility by utility

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper RuleRequired information about lead was not given to customers.EPA: Public EducationJan. 1, 2018—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 7 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic and chromium (total) results here are Wisconsin’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. New Holstein Waterworks’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Wisconsin’s results run from Jan. 8, 2020 to Sept. 8, 2026; EPA’s compliance samples are from June 20, 2014 to June 20, 2014.

Testing your own tap

New Holstein Waterworks’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Wisconsin certifies.

The 3 labs Wisconsin certifies closest to the area New Holstein Waterworks serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Fond du Lac County Health Department

    Fond du Lac, WI · about 16 miles

    Certified for bacteria

    (920) 929-3085

  • Kohler Co., CHEM Lab

    Kohler, WI · about 21 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (920) 457-4441

  • UW-Oshkosh Env. Research & Innovation Ctr

    Oshkosh, WI · about 23 miles

    Certified for bacteria, nitrate, metals

    (920) 424-3148

Wisconsin State Laboratory of Hygiene: Well water test kits ordered by phone and shipped free; you pay to mail the sample back, and the lab bills you after testing. Tests run from bacteria alone to a homeowner package covering bacteria, nitrate, fluoride, metals, hardness, volatile organic compounds and atrazine. Bacteria is $35, nitrate $35, lead $38, and the homeowner package $450, as of July 1, 2026. Public Environmental and Water Testing Prices, Wisconsin State Laboratory of Hygiene.

All 156 certified labs for Wisconsin

Sources

PWSID WI4080270. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Calumet County

All Wisconsin utilities

What to do next