Skip to content
TapBuff
ZIP

Glenwood City Waterworks

What EPA’s and Wisconsin’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,102 people
Connections
375
Water source
Groundwater
Based in
Glenwood City, WI
County
St. Croix
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

54013

The short answer

2 results are above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, haloacetic acids (HAA5), fluoride, nitrate, total trihalomethanes (TTHM) and chromium (total): Wisconsin’s own results, samples taken from Jan. 29, 2020 to Aug. 27, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from Nov. 20, 2014 to Aug. 16, 2017. Newer results are in the utility’s annual water quality report.

Above the health goal2

Arsenic

Comes from the source

Above the health goal

1.4ppb

Highest yearly average, 2020 to 2026

2026 average: 0.5 ppb

Averaged by year, the highest was 1.4 ppb, in 2020: below EPA’s legal limit of 10 ppb, but above its health goal of zero. Its highest single sample was 2.0 ppb. In 2026, the latest year on file, its two samples averaged 0.5 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 4.0 ppb, in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Uranium

Comes from the source

Above the health goal

1.6ppb

Highest yearly average, 2014 to 2017

2017, one sample: 1.3 ppb

Averaged by year, the highest was 1.6 ppb, in 2014: below EPA’s legal limit of 30 ppb, but above its health goal of zero. In 2017, the latest year on file, its one sample was 1.3 ppb.

What handles it

Below EPA’s limits4

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

22.5ppb

Highest yearly average, 2020 to 2026

2026, one sample: 7.4 ppb

Averaged by year, the highest was 22.5 ppb, in 2025, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its one sample was 7.4 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 25.1 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.83ppm

Highest yearly average, 2020 to 2026

2026 average: 0.82 ppm

Averaged by year, the highest was 0.83 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 2.1 ppm. In 2026, the latest year on file, its 18 samples averaged 0.82 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.66 ppm, in 2014.

What handles it

Nitrate

Comes from the source

Below EPA’s limits

0.79ppm

Highest sample; found in 7 of 14

2026 average: 0.054 ppm

The highest sample, in 2021, was 0.79 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its two samples averaged 0.054 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.22 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

6.2ppb

Highest yearly average, 2020 to 2026

Averaged by year, the highest was 6.2 ppb, in 2026, below EPA’s legal limit of 80 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 6.2 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Arsenic, Uranium

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Hard to very hard depending on the source, 150 to 242 mg/L (8.8 to 14.2 grains per gallon), across 2 sampling points, 2017 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared, salt includedSoftener or salt-free conditioner?Wisconsin water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, haloacetic acids (HAA5), fluoride, nitrate, total trihalomethanes (TTHM) and chromium (total) results here are Wisconsin’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Glenwood City Waterworks’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Wisconsin’s results run from Jan. 29, 2020 to Aug. 27, 2026; EPA’s compliance samples are from Nov. 20, 2014 to Aug. 16, 2017.

Testing your own tap

Glenwood City Waterworks’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Wisconsin certifies.

The 3 labs Wisconsin certifies closest to the area Glenwood City Waterworks serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Dunn County Health Department

    Menomonie, WI · about 22 miles

    Certified for bacteria, nitrate

    (715) 232-2388

  • Menomonie Waste Water

    Menomonie, WI · about 22 miles

    Certified for bacteria

    (715) 232-2175

  • Quality Water Testing, Inc.

    Somerset, WI · about 22 miles

    Certified for bacteria, nitrate

    (715) 247-4873

Wisconsin State Laboratory of Hygiene: Well water test kits ordered by phone and shipped free; you pay to mail the sample back, and the lab bills you after testing. Tests run from bacteria alone to a homeowner package covering bacteria, nitrate, fluoride, metals, hardness, volatile organic compounds and atrazine. Bacteria is $35, nitrate $35, lead $38, and the homeowner package $450, as of July 1, 2026. Public Environmental and Water Testing Prices, Wisconsin State Laboratory of Hygiene.

All 156 certified labs for Wisconsin

Sources

PWSID WI6560120. Rebuilt from EPA data on Oct. 18, 2026.

Also in St. Croix County

All Wisconsin utilities

What to do next