Skip to content
TapBuff

Elkhorn Waterworks

EPA’s and Wisconsin’s records have results for 38 contaminants in its water; 7 were found.

Serves 10,317 people · Groundwater · Elkhorn, WI · Hardness: varies by source

Serves
10,317 people
Connections
3,821
Water source
Groundwater
Based in
Elkhorn, WI
County
Walworth
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

53121

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 6 health-based violations since 2016, all resolved in EPA’s file.

Filters for lead, arsenic and uranium, if you want them lower⁠The 6 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 21, 2025 to Feb. 9, 2026.

Lead and copper: EPA SDWIS monitoring periods ending 2011 to 2026.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.5 ppm, for the period ending Dec. 31, 1996. None since is on file, so it is not counted as a current finding.

Arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate and chromium (total): Wisconsin’s own results, samples taken from Jan. 16, 2020 to Aug. 18, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from Sept. 19, 2017 to Sept. 20, 2017. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 7 results

Lead, arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Lead, Action level 15 ppb · health goal zero; 90th percentile 13 ppb

90th percentile, 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 13 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

About lead
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 8.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.6 ppb · Comes from the source

Averaged by year, the highest was 8.3 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 11 ppb. In 2026, the latest year on file, its 11 samples averaged below the limit. EPA recorded no violation for arsenic at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 28.5 ppb, in 2018, and EPA recorded a violation in 2018.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 64.4 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 26.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 64.4 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 99.4 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 43.4 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 19.2 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 18.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 19.2 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 29.9 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 18.3 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.25 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.19 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.25 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.27 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.28 ppm, in 2012.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.25 ppb

Highest yearly average, 2017 · Comes from the source

Averaged by year, the highest was 0.25 ppb, in 2017, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.25 ppb. That is the only year on file.

What handles it

About uranium
Nitrate, Legal limit 10 ppm; highest 0.057 ppm

Highest sample; found in 3 of 3 · 2021 average: 0.053 ppm · Comes from the source

The highest sample, in 2021, was 0.057 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.72 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Wisconsin utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

6 health-based violations since 2016, 4 for combined Radium (-226 and -228), 1 for the Lead and Copper Rule and 1 for arsenic. The latest began Jan. 1, 2021.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Combined Radium (-226 and -228)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2021 to March 31, 2021, 9.1 PCI/LResolved
Lead and Copper RuleLead service lines were not replaced as required.EPA: Lead Service Line Replacement (LSLR)Nov. 1, 2020 to Sept. 21, 2022Resolved
Combined Radium (-226 and -228)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2020 to Dec. 31, 2020, 9.5 PCI/LResolved
July 1, 2019 to Sept. 30, 2019, 10.1 PCI/LResolved
April 1, 2019 to June 30, 2019, 9.8 PCI/LResolved
The other one, back to 2018
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
ArsenicThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2018 to Dec. 31, 2018, 18.5 ppbResolved

Health-based violations only. 3 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Lead, Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Soft to hard depending on the source, 47 to 140 mg/L (2.7 to 8.2 grains per gallon), across 4 sampling points, 2017 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Elkhorn Waterworks reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2025 to 2026 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate and chromium (total) results here are Wisconsin’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Elkhorn Waterworks’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 21, 2025 to Feb. 9, 2026; Wisconsin’s results run from Jan. 16, 2020 to Aug. 18, 2026; EPA’s compliance samples are from Sept. 19 to 20, 2017.

Testing your own tap

Elkhorn Waterworks’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Wisconsin certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Elkhorn Waterworks’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 13 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Wisconsin certifies closest to the area Elkhorn Waterworks serves, or a kit by mail

The 3 labs Wisconsin certifies closest to the area Elkhorn Waterworks serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Walworth Co. Health & Human Services

    Elkhorn, WI · under a mile

    Certified for bacteria, nitrate

    (262) 741-3200

  • Lake Geneva Utility Commission

    Lake Geneva, WI · about 12 miles

    Certified for bacteria

    (262) 248-2311 ext. 406

  • S & R Krizan Pump Service Incorporated

    Wind Lake, WI · about 18 miles

    Certified for bacteria

    (262) 895-6454

All 156 certified labs for Wisconsin⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Wisconsin certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Wisconsin’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WI2650062. Rebuilt from EPA data on Oct. 25, 2026.