Skip to content
TapBuff
ZIP

Cedar Falls Acres MHP

What EPA’s and Wisconsin’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
95 people
Connections
50
Water source
Groundwater
Based in
Menomonie, WI
County
Dunn
Owner
Private
Hardness
Moderately hard
The ZIP code it serves

54751

The short answer

1 result is above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.4 ppm, for the period ending June 30, 1995. None since is on file, so it is not counted as a current finding.

Nitrate: Wisconsin’s own results, samples taken from May 2, 2023 to May 2, 2023, with EPA’s 2012 to 2019 file for earlier years.

Arsenic, fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Aug. 21, 2018 to Aug. 21, 2018. Newer results are in the utility’s annual water quality report.

Above the health goal1

Arsenic

Comes from the source

Above the health goal

1.1ppb

Highest yearly average, 2018

Averaged by year, the highest was 1.1 ppb, in 2018: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That is the only year on file.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

3.1ppm

One sample

2023, one sample: 3.1 ppm

The highest sample, in 2023, was 3.1 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its one sample was 3.1 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 2.9 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.15ppm

Highest yearly average, 2018

Averaged by year, the highest was 0.15 ppm, in 2018, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Moderately hard, 68 mg/L (4 grains per gallon), at its one sampling point, in 2018.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 4 grains per gallon, salt includedSoftener or salt-free conditioner?Wisconsin water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There are 45 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate results here are Wisconsin’s own from 2023 on, with EPA’s national file for 2012 to 2019. Arsenic, fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Cedar Falls Acres MHP’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Wisconsin’s results run from May 2, 2023 to May 2, 2023; EPA’s compliance samples are from Aug. 21, 2018 to Aug. 21, 2018.

Testing your own tap

Cedar Falls Acres MHP’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Wisconsin certifies.

The 3 labs Wisconsin certifies closest to the area Cedar Falls Acres MHP serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Dunn County Health Department

    Menomonie, WI · under a mile

    Certified for bacteria, nitrate

    (715) 232-2388

  • Menomonie Waste Water

    Menomonie, WI · under a mile

    Certified for bacteria

    (715) 232-2175

  • Commercial Testing Laboratory Inc.

    Colfax, WI · about 16 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (715) 962-3121

Wisconsin State Laboratory of Hygiene: Well water test kits ordered by phone and shipped free; you pay to mail the sample back, and the lab bills you after testing. Tests run from bacteria alone to a homeowner package covering bacteria, nitrate, fluoride, metals, hardness, volatile organic compounds and atrazine. Bacteria is $35, nitrate $35, lead $38, and the homeowner package $450, as of July 1, 2026. Public Environmental and Water Testing Prices, Wisconsin State Laboratory of Hygiene.

All 156 certified labs for Wisconsin

Sources

PWSID WI6170271. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Dunn County

All Wisconsin utilities

What to do next