Skip to content
TapBuff

City of Arlington

EPA’s and Washington’s records have results for 37 contaminants in its water; 6 were found.

Serves 29,508 people · Surface water bought from another system · Arlington, WA · Hardness: varies by source

Serves
29,508 people
Connections
9,267
Water source
Surface water bought from another system
Based in
Arlington, WA
County
Snohomish
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

98223

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for arsenic, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 23 to Dec. 21, 2023.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.8 ppm, for the period ending Dec. 31, 1993. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, nitrate, chromium (total) and fluoride: Washington’s own results, samples taken from Feb. 18, 2020 to Sept. 2, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Below EPA’s limits, 6 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
PFHxS, EPA’s 2029 limit 10 ppt; highest 4.9 ppt

Highest sample, Feb. 23, 2023; found in 2 of 10 · Comes from the source

The highest sample was 4.9 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 24.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 18 ppb · Forms or is added in treatment

Averaged by year, the highest was 24.8 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 71.2 ppb. In 2026, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 25.2 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 18.2 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 15.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 18.2 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 42.3 ppb. In 2026, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 19.9 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.75 ppb · Comes from the source

Averaged by year, the highest was 1.6 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 1.5 ppm

Highest sample; found in 13 of 15 · 2026 average: 0.52 ppm · Comes from the source

The highest sample, in 2021, was 1.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.7 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 2.8 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 2.8 ppb, in 2024, below EPA’s legal limit of 100 ppb. Its highest single sample was 5.5 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.0 ppb, in 2015.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits4.9 ppt highest, found in 2 of 10 samples. Details
PFNA10 pptNot foundNot found in any of 10 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 10 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 10 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Washington utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Fluoride
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Soft to moderately hard depending on the source, 42 to 84 mg/L (2.4 to 4.9 grains per gallon), across 2 sampling points, 2020 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Arlington reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, nitrate, chromium (total) and fluoride results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Arlington’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 23 to Dec. 21, 2023; Washington’s results run from Feb. 18, 2020 to Sept. 2, 2026.

Testing your own tap

City of Arlington’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Arlington’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Washington certifies closest to the area City of Arlington serves, or a kit by mail

The 3 labs Washington certifies closest to the area City of Arlington serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Freshwater Analytical Labs, LLC

    Arlington, WA · under a mile

    Certified for bacteria

    (360) 913-7542

  • Everett Environmental Laboratory

    Everett, WA · about 18 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (425) 257-8230

  • Precision Analytical Laboratories, LLC

    Everett, WA · about 19 miles

    Certified for lead and copper, metals, minerals and other inorganics

    (425) 740-4597

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5302950. Rebuilt from EPA data on Oct. 25, 2026.