Skip to content
TapBuff

City of Mountlake Terrace

EPA’s and Washington’s records have results for 32 contaminants in its water; 2 were found.

Serves 26,402 people · Surface water bought from another system · Mountlake Terrace, WA

Serves
26,402 people
Connections
9,290
Water source
Surface water bought from another system
Based in
Mountlake Terrace, WA
County
Snohomish
Owner
Local government
The ZIP code it serves

98043

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium, plus nitrate, arsenic and other regulated chemicals, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 1, 2023 to Feb. 7, 2024.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): Washington’s own results, samples taken from June 23, 2020 to Sept. 9, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 54.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 44.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 54.6 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 83.2 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 51.9 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 34.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 33.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 34.6 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 50.4 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 37.7 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Washington utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 6 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

City of Mountlake Terrace reported adding chloramine before water enters its pipes, at its one sampling point, in its 2023 to 2024 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Mountlake Terrace’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 1, 2023 to Feb. 7, 2024; Washington’s results run from June 23, 2020 to Sept. 9, 2026.

Testing your own tap

City of Mountlake Terrace’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. About lead.
The 3 labs Washington certifies closest to the area City of Mountlake Terrace serves, or a kit by mail

The 3 labs Washington certifies closest to the area City of Mountlake Terrace serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Brooks Applied Labs, LLC

    Seattle, WA · about 5 miles

    Certified for lead and copper, metals

    (206) 753-6119

  • IEH Analytical Laboratories

    Seattle, WA · about 5 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics, PFAS

    (206) 632-2715

  • Alliance Technical Group, LLC-Seattle

    Seattle, WA · about 8 miles

    Certified for bacteria, lead and copper, metals

    (206) 352-3790

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5357250. Rebuilt from EPA data on Oct. 25, 2026.