Skip to content
TapBuff

Veolia Mechanicsburg

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 14 were found.

Serves 45,013 people · Surface water · Harrisburg, PA · Hardness: very hard

Serves
45,013 people
Connections
14,601
Water source
Surface water
Based in
Harrisburg, PA
County
Cumberland
Owner
Private
Hardness
Very hard
The 4 ZIP codes it serves

17027, 17050, 17055, 17070

The short answer

None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. 3 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Feb. 12, 2024 to July 29, 2026, with EPA’s UCMR 5 samples, 2023, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Feb. 8 to Nov. 20, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), arsenic and uranium: Pennsylvania’s own results, samples taken from Feb. 5, 2020 to Aug. 11, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFPeA at 8.9 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

10.4 ppt

Highest sample, March 5, 2025; found in 9 of 30

2026: not found

The highest sample was 10.4 ppt, about 2.6 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, it wasn’t found in any of its eight samples.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 6.7 ppt, for the year to March 31, 2025: below Pennsylvania’s limit of 18 ppt and above EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, found it in 3 of 12, the highest 11.4 ppt.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

7.1 ppt

Highest sample, May 8, 2025; found in 16 of 30

2026 average: 1.6 ppt

The highest sample was 7.1 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its eight samples averaged 1.6 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 6.3 ppt, for the year to March 31, 2026: below Pennsylvania’s limit of 14 ppt and above EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, found it in 3 of 12, the highest 7.1 ppt.

What handles it

Below EPA’s limits, 8 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Nitrate, Legal limit 10 ppm; highest 5.3 ppm

Highest sample; found in 59 of 59 · 2026 average: 2.9 ppm · Comes from the source

The highest sample, in 2025, was 5.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 5.3 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 30.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 20.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 30.7 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 66.1 ppb. In 2026, the latest year on file, its 18 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48.7 ppb, in 2018, and EPA recorded violations in 2017 and 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 33.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 26.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 33.5 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 101 ppb. In 2026, the latest year on file, its 18 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 47.1 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFHxS, EPA’s 2029 limit 10 ppt; highest 2.5 ppt

Highest sample, March 5, 2025; found in 10 of 30 · 2026 average: 0.21 ppt · Comes from the source

The highest sample was 2.5 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. In 2026, the latest year on file, its eight samples averaged 0.21 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way EPA’s limit is judged, the highest was 1.9 ppt, for the year to March 31, 2026: below EPA’s new limit of 10 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, didn’t find it in any of 12.

What handles it

About PFHxS
Lead, Action level 15 ppb · health goal zero; 90th percentile 3.3 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 3.3 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.48 ppm

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 0.48 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppm, in 2016.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 2.6 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 2.6 ppb, in 2023, below EPA’s legal limit of 100 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.4 ppb, in 2018.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 6.0 ppt

Highest sample, Feb. 12, 2024; found in 16 of 30 · 2026 average: 0.93 ppt · Comes from the source

The highest sample was 6.0 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its eight samples averaged 0.93 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, found it in 3 of 12, the highest 5.7 ppt.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)7.1 ppt highest, found in 16 of 30 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)10.4 ppt highest, found in 9 of 30 samples. Details
PFHxS10 pptBelow EPA’s limits2.5 ppt highest, found in 10 of 30 samples. Details
PFNA10 pptNot foundNot found in any of 30 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 30 samples
PFBSIndex onlyBelow EPA’s limits6.0 ppt highest, found in 16 of 30 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA8.9 ppt17 of 30None covers it
PFHxA7.1 ppt16 of 30None covers it
PFBA5.4 ppt6 of 30None covers it
PFHpA3.7 ppt13 of 30NSF/ANSI 53: Total PFAS Reduction
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NFDHA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFUnA

From EPA’s UCMR 5 sampling

  • Lithium
  • NEtFOSAA
  • NMeFOSAA
  • PFTA
  • PFTrDA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Lead Reduction

    For: PFOS, PFOA, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: PFOS, PFOA, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Very hard, 323 mg/L (18.9 grains per gallon), at its one sampling point, in 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Veolia Mechanicsburg reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

3 health-based violations since 2016, all for total Haloacetic Acids (HAA5). The latest began Jan. 1, 2018.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2018 to March 31, 2018Resolved
Oct. 1, 2017 to Dec. 31, 2017Resolved
July 1, 2017 to Sept. 30, 2017Resolved

Health-based violations only. 8 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), arsenic and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Veolia Mechanicsburg’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 8 to Nov. 20, 2023; Pennsylvania’s results run from Feb. 5, 2020 to Aug. 11, 2026; Pennsylvania’s PFAS results run from Feb. 12, 2024 to July 29, 2026.

Testing your own tap

Veolia Mechanicsburg’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Veolia Mechanicsburg’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 3.3 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Veolia Mechanicsburg’s results flag: PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area Veolia Mechanicsburg serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Veolia Mechanicsburg serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • H2O Environmental LLC

    Harrisburg, PA · about 11 miles

    Certified for bacteria

    (717) 743-9310

  • ALS Environmental - Middletown

    Middletown, PA · about 13 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (717) 944-5541

  • Microbac Laboratories, Inc. - Harrisburg

    Harrisburg, PA · about 16 miles

    (570) 348-0775

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA7210028. Rebuilt from EPA data on Oct. 25, 2026.