Skip to content
TapBuff

Nwwa Warrington Township

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 15 were found.

Serves 21,588 people · Surface water bought from another system · North Wales, PA · Hardness: very hard

Serves
21,588 people
Connections
8,788
Water source
Surface water bought from another system
Based in
North Wales, PA
County
Bucks
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

18914, 18976

The short answer

None of the results here is above a limit in force today. PFOS is above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. 3 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Feb. 9, 2023 to Aug. 27, 2026, with EPA’s UCMR 5 samples, 2025, as the earlier record.

Lithium: EPA UCMR 5, samples taken from Jan. 15 to Nov. 20, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2008 to 2025.

Total trihalomethanes (TTHM), uranium, arsenic, nitrate, haloacetic acids (HAA5), fluoride and chromium (total): Pennsylvania’s own results, samples taken from Feb. 12, 2020 to Aug. 12, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFBA at 27.8 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOS

Comes from the source

Above EPA’s new limit (2029)

4.3 ppt

Highest sample, March 2, 2026; found in 1 of 74

2026 average: 0.29 ppt

The highest sample was 4.3 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its 15 samples averaged 0.29 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 1.1 ppt, for the year to June 30, 2026: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 40.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

20.6 ppb

Highest sample, July 16, 2025; found in 6 of 40

The highest sample was 20.6 ppb, about twice EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 10 results

PFOA, uranium, arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFOA, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 2.3 ppt

Highest sample, Aug. 15, 2024; found in 3 of 74 · 2026 average: 0.29 ppt · Comes from the source

The highest sample was 2.3 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its 15 samples averaged 0.29 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0.57 ppt, for the year to Sept. 30, 2024: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 40.

What handles it

About PFOA
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 37.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 30 ppb · Forms or is added in treatment

Averaged by year, the highest was 37.9 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 77.8 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 32.9 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 12.7 ppb

Highest yearly average, 2020 to 2025 · 2025 average: 10.1 ppb · Comes from the source

Averaged by year, the highest was 12.7 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 41.3 ppb. In 2025, the latest year on file, its two samples averaged below the limit. EPA recorded no violation for uranium at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 44.5 ppb, in 2016.

What handles it

About uranium
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.5 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 2.7 ppb · Comes from the source

Averaged by year, the highest was 3.5 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 5.0 ppb. In 2024, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.5 ppb, in 2015.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 3.1 ppm

Highest sample; found in 25 of 29 · 2026 average: 0.93 ppm · Comes from the source

The highest sample, in 2024, was 3.1 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its five samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 8.1 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 17.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 14.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 17.6 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 31.6 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 15.2 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.6 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.6 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.1 ppm

Highest yearly average, 2020 to 2024 · 2024 average: 0.057 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.1 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.12 ppm. In 2024, the latest year on file, its six samples averaged below the limit.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 0.5 ppb

Highest yearly average, 2020 to 2024 · 2024: not found · Comes from the source

Averaged by year, the highest was 0.5 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.0 ppb. In 2024, the latest year on file, it wasn’t found in any of its six samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.2 ppb, in 2015.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 1.6 ppt

Highest sample, March 2, 2026; found in 1 of 74 · 2026 average: 0.11 ppt · Comes from the source

The highest sample was 1.6 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its 15 samples averaged 0.11 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 40.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptBelow EPA’s limits2.3 ppt highest, found in 3 of 74 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)4.3 ppt highest, found in 1 of 74 samples. Details
PFHxS10 pptNot foundNot found in any of 74 samples
PFNA10 pptNot foundNot found in any of 74 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 44 samples
PFBSIndex onlyBelow EPA’s limits1.6 ppt highest, found in 1 of 74 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA27.8 ppt11 of 38None covers it
PFHxA2.3 ppt3 of 74None covers it
PFPeA2.0 ppt1 of 38None covers it
23 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: PFOS, PFOA, Arsenic, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Uranium, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: PFOS, PFOA, Uranium, Arsenic, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Very hard, typically 354 mg/L (20.7 grains per gallon), across 6 sampling points, 2020 to 2023.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Nwwa Warrington Township reported disinfecting with chlorine, not chloramine, at all 13 of its sampling points, in its 2025 sampling for EPA. It also reported ozone.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

3 health-based violations since 2016, all for the Surface Water Treatment Rule. The latest began Dec. 1, 2018.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Dec. 1, 2018 to Dec. 31, 2018Resolved
Aug. 1, 2016 to Aug. 31, 2016Resolved
July 1, 2016 to July 31, 2016Resolved

Health-based violations only. 146 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), uranium, arsenic, nitrate, haloacetic acids (HAA5), fluoride and chromium (total) results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Nwwa Warrington Township’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 15 to Nov. 20, 2025; Pennsylvania’s results run from Feb. 12, 2020 to Aug. 12, 2026; Pennsylvania’s PFAS results run from Feb. 9, 2023 to Aug. 27, 2026.

Testing your own tap

Nwwa Warrington Township’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Nwwa Warrington Township’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0.6 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Nwwa Warrington Township’s results flag: PFOS and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area Nwwa Warrington Township serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Nwwa Warrington Township serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eurofins Philadelphia - Horsham

    Horsham, PA · about 6 miles

    Certified for bacteria

    (215) 355-3900

  • Analytical Laboratories, Inc

    Telford, PA · about 11 miles

    Certified for bacteria, nitrate

    (215) 723-6466

  • Criterion Laboratories Inc

    Bensalem, PA · about 17 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (215) 244-1300

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA1090070. Rebuilt from EPA data on Oct. 25, 2026.