Skip to content
TapBuff

Mt Joy Boro Auth

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 9 were found.

Serves 15,261 people · Groundwater influenced by surface water · Mount Joy, PA · Hardness: hard

Serves
15,261 people
Connections
5,181
Water source
Groundwater influenced by surface water
Based in
Mount Joy, PA
County
Lancaster
Owner
Local government
Hardness
Hard
The 2 ZIP codes it serves

17545, 17552

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for PFOS, PFOA and lead, if you want them lower⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Jan. 24, 2024 to Aug. 18, 2026, with EPA’s UCMR 5 samples, 2024 to 2025, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Feb. 6, 2024 to May 13, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), chromium (total), arsenic, fluoride and uranium: Pennsylvania’s own results, samples taken from Feb. 10, 2020 to Sept. 9, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. One other PFAS with no federal limit was found, the highest PFPeA at 3.3 ppt: see it below.

Below EPA’s limits, 8 results

PFOS, PFOA and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFOS, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 3.1 ppt

Highest sample, Feb. 24, 2026; found in 6 of 28 · 2026 average: 0.31 ppt · Comes from the source

The highest sample was 3.1 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its 10 samples averaged 0.31 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 2.7 ppt, for the year to March 31, 2026: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2024 to 2025, didn’t find it in any of 8.

What handles it

About PFOS
PFOA, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 3.0 ppt

Highest sample, Feb. 24, 2026; found in 6 of 28 · 2026 average: 0.56 ppt · Comes from the source

The highest sample was 3.0 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its 10 samples averaged 0.56 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 2.3 ppt, for the year to March 31, 2026: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2024 to 2025, didn’t find it in any of 8.

What handles it

About PFOA
Nitrate, Legal limit 10 ppm; highest 5.8 ppm

Highest sample; found in 97 of 97 · 2026 average: 3.8 ppm · Comes from the source

The highest sample, in 2026, was 5.8 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 7.0 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 22.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 19.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 22.5 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 70.7 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 38.5 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.0 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 5.0 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 3.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.0 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 20 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.7 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 0.75 ppb

Highest yearly average, 2021 to 2024 · 2024 average: 0.5 ppb · Comes from the source

Averaged by year, the highest was 0.75 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.0 ppb. In 2024, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.1 ppb, in 2012.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 3.1 ppt

Highest sample, July 29, 2026; found in 8 of 14 · 2026 average: 1.1 ppt · Comes from the source

The highest sample was 3.1 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its 10 samples averaged 1.1 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2024 to 2025, didn’t find it in any of 8.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptBelow EPA’s limits3.0 ppt highest, found in 6 of 28 samples. Details
PFOS4.0 pptBelow EPA’s limits3.1 ppt highest, found in 6 of 28 samples. Details
PFHxS10 pptNot foundNot found in any of 14 samples
PFNA10 pptNot foundNot found in any of 14 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples
PFBSIndex onlyBelow EPA’s limits3.1 ppt highest, found in 8 of 14 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA3.3 ppt1 of 8None covers it
29 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Fluoride
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFHxS
  • PFNA

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 4 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Lead Reduction

    For: PFOS, PFOA, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: PFOS, PFOA, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Hard, 170 mg/L (9.9 grains per gallon), at its one sampling point, in 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Mt Joy Boro Auth reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2024 to 2025 sampling for EPA. It also reported ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), chromium (total), arsenic, fluoride and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Mt Joy Boro Auth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 6, 2024 to May 13, 2025; Pennsylvania’s results run from Feb. 10, 2020 to Sept. 9, 2026; Pennsylvania’s PFAS results run from Jan. 24, 2024 to Aug. 18, 2026.

Testing your own tap

Mt Joy Boro Auth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Mt Joy Boro Auth’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 4.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area Mt Joy Boro Auth serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Mt Joy Boro Auth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eurofins Lancaster Laboratories Environment Testing, LLC

    Lancaster, PA · about 10 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (717) 656-2300

  • Owl Hill Laboratories LLC

    Lititz, PA · about 10 miles

    Certified for bacteria

    (717) 627-2520

  • ALS Environmental - Middletown

    Middletown, PA · about 14 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (717) 944-5541

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA7360091. Rebuilt from EPA data on Oct. 25, 2026.