Skip to content
TapBuff

Lansford Coaldale Jt Water Aut

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 6 were found.

Serves 9,300 people · Groundwater · Lansford, PA

Serves
9,300 people
Connections
3,500
Water source
Groundwater
Based in
Lansford, PA
County
Carbon
Owner
Local government
The 3 ZIP codes it serves

18218, 18232, 18240

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.

Filters for PFOA, PFOS and lead, if you want them lower⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Feb. 8, 2024 to March 12, 2026, with EPA’s UCMR 5 samples, 2025, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Feb. 19 to Aug. 18, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending Dec. 31, 1998. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium: Pennsylvania’s own results, samples taken from Aug. 6, 2020 to Aug. 6, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOA and PFOS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.

Below EPA’s limits, 6 results

PFOA, PFOS and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
PFOA, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 0.71 ppt

Highest sample, April 10, 2025; found in 2 of 7 · 2026: not found · Comes from the source

The highest sample was 0.71 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, it wasn’t found in its one sample.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0.31 ppt, for the year to June 30, 2025: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 2.

What handles it

About PFOA
PFOS, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 0.59 ppt

Highest sample, April 10, 2025; found in 2 of 7 · 2026: not found · Comes from the source

The highest sample was 0.59 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, it wasn’t found in its one sample.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0.27 ppt, for the year to June 30, 2025: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 2.

What handles it

About PFOS
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 6.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 5.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 6.7 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 9.2 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.9 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.35 ppm

Highest sample; found in 3 of 6 · 2025: not found · Comes from the source

The highest sample, in 2022, was 0.35 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.27 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.8 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 1.8 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 2.0 ppb. In 2026, the latest year on file, it wasn’t found in any of its two samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.4 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.34 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.34 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptBelow EPA’s limits0.71 ppt highest, found in 2 of 7 samples. Details
PFOS4.0 pptBelow EPA’s limits0.59 ppt highest, found in 2 of 7 samples. Details
PFHxS10 pptNot foundNot found in any of 5 samples
PFNA10 pptNot foundNot found in any of 5 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 5 samples
PFBSIndex onlyNot foundNot found in any of 5 samples
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFBS
  • PFHxS
  • PFNA

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for the Groundwater Rule. It began Aug. 1, 2020.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Groundwater RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Aug. 1, 2020 to Aug. 31, 2020Resolved

Health-based violations only. 9 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, PFOS Reduction, Lead Reduction

    For: PFOA, PFOS, Lead

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction

    For: PFOA, PFOS, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Lansford Coaldale Jt Water Aut reported adding chloramine before water enters its pipes, at its one sampling point, in its 2025 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Lansford Coaldale Jt Water Aut’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 19 to Aug. 18, 2025; Pennsylvania’s results run from Aug. 6, 2020 to Aug. 6, 2026; Pennsylvania’s PFAS results run from Feb. 8, 2024 to March 12, 2026.

Testing your own tap

Lansford Coaldale Jt Water Aut’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Lansford Coaldale Jt Water Aut’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0.34 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area Lansford Coaldale Jt Water Aut serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Lansford Coaldale Jt Water Aut serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • HawkMtn Labs Inc

    Hazle Township, PA · about 11 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (570) 455-6011

  • Eurofins Drinking Water and Wastewater Northeast, LLC

    Pottsville, PA · about 23 miles

    Certified for bacteria

    (570) 662-7315

  • ABE Laboratories LLC

    Bath, PA · about 26 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (610) 837-7721

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA3130004. Rebuilt from EPA data on Oct. 25, 2026.