Skip to content
TapBuff

Weatherly Boro Mun Auth

What EPA’s and Pennsylvania’s records show in this utility’s water: PFAS; nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
2,612 people
Connections
965
Water source
Groundwater
Based in
Weatherly, PA
County
Carbon
Owner
Local government
The ZIP code it serves

18255

The short answer

1 result is above EPA’s legal limit, 1 more is above EPA’s new limit, which takes effect in 2029, and 2 more are above the health goal. The worst: Copper, above the action level. 2 health-based violations since 2016.

What handles it

What was found

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from March 21, 2024 to Aug. 11, 2026.

Lead and copper: EPA SDWIS monitoring periods ending 2010 to 2023.

Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5), total trihalomethanes (TTHM) and uranium: Pennsylvania’s own results, samples taken from Sept. 14, 2020 to Aug. 11, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: PFOS and PFOA were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below.

EPA’s 2024 PFAS rule, compound by compound

PFASEPA’s limitResult
PFOA4.0 pptAbove the health goal2.6 ppt highest, found in 2 of 18 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)13.1 ppt highest, found in 13 of 19 samples. Details
PFHxS10 pptNot foundNot found in any of 2 samples
PFNA10 pptNot foundNot found in any of 2 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 2 samples
PFBSIndex onlyNot foundNot found in any of 2 samples
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

Above the legal limit1

Copper

Comes from pipes, often your own

Above the action level

2.7ppm

90th percentile, 2023

In the latest period, 9 in 10 homes sampled were at or below 2.7 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Above EPA’s new limit, which takes effect in 20291

PFOS

Comes from the source

Above EPA’s new limit (2029)

13.1ppt

Highest sample, Sept. 23, 2024; found in 13 of 19

2026 average: 2.0 ppt

The highest sample was 13.1 ppt, about 3.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 7.0 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 18 ppt and above EPA’s new limit of 4.0 ppt. In 2026, the latest year on file, its five samples averaged 2.0 ppt.

What handles it

Above the health goal2

PFOA

Comes from the source

Above the health goal

2.6ppt

Highest sample, Dec. 16, 2024; found in 2 of 18

2026: not found

The highest sample was 2.6 ppt: below EPA’s new limit of 4.0 ppt, which takes effect in 2029, but above its health goal of zero. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0.66 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt. In 2026, the latest year on file, it wasn’t found in any of its four samples.

What handles it

Lead

Comes from pipes, often your own

Above the health goal

6.0ppb

90th percentile, 1996

In the latest period, 9 in 10 homes sampled were at or below 6.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits1

Nitrate

Comes from the source

Below EPA’s limits

2.4ppm

Highest sample; found in 24 of 24

2026 average: 1.6 ppm

The highest sample, in 2021, was 2.4 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged 1.6 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 2.9 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
10 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Total trihalomethanes (TTHM)
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFBS
  • PFHxS
  • PFNA

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Copper Reduction, PFOS Reduction, PFOA Reduction, Lead Reduction

    For: Copper, PFOS, PFOA, Lead

    Other certifiers’ wording: Total PFAS Reduction; Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

  • NSF/ANSI 58

    Claims: Copper Reduction, Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: Copper, PFOS, PFOA, Lead

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for PFAS, ranked

The best water filters for lead, ranked

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Nov. 22, 2025—Resolved
Lead and Copper RuleA required study or plan for corrosion control was not done on time.EPA: OCCT/SOWT Study/RecommendationApril 1, 2025—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 217 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5), total trihalomethanes (TTHM) and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Weatherly Boro Mun Auth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Pennsylvania’s results run from Sept. 14, 2020 to Aug. 11, 2026; Pennsylvania’s PFAS results run from March 21, 2024 to Aug. 11, 2026.

Testing your own tap

Weatherly Boro Mun Auth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

The 3 labs Pennsylvania certifies closest to the area Weatherly Boro Mun Auth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • HawkMtn Labs Inc

    Hazle Township, PA · about 11 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (570) 455-6011

  • A E Kirby Memorial Health Center

    Wilkes-Barre, PA · about 22 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (570) 822-4278

  • ABE Laboratories LLC

    Bath, PA · about 25 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (610) 837-7721

Penn State Agricultural Analytical Services Laboratory: Drinking water test kits from many county Extension offices, mailed back to the lab overnight with payment. Packages cover bacteria and basic chemistry, with add-ons for nitrate, metals, lead, and mining or gas drilling concerns. The standard package of bacteria, pH and total dissolved solids is $60, or $70 with nitrate; bacteria alone is $40, nitrate $15 and lead $25. Drinking Water Testing, Penn State Agricultural Analytical Services Lab.

All 108 certified labs for Pennsylvania

Sources

PWSID PA3130015. Rebuilt from EPA data on Oct. 18, 2026.