Skip to content
TapBuff

Mountain View Village West

What EPA’s and Colorado’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
440 people
Connections
160
Water source
Groundwater
Based in
Bloomfield Hills, CO
County
Lake
Owner
Private
Hardness
Very hard
The ZIP code it serves

80461

The short answer

1 result is above the health goal. The worst: Uranium, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Uranium, nitrate, fluoride, chromium (total), arsenic, haloacetic acids (HAA5) and total trihalomethanes (TTHM): Colorado’s own results, samples taken from Feb. 12, 2020 to Feb. 3, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Uranium

Comes from the source

Above the health goal

12.8ppb

Highest yearly average, 2022 to 2025

Averaged by year, the highest was 12.8 ppb, in 2025: below EPA’s legal limit of 30 ppb, but above its health goal of zero. Its highest single sample was 15.1 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 18.3 ppb, in 2013.

What handles it

Below EPA’s limits3

Nitrate

Comes from the source

Below EPA’s limits

3.8ppm

Highest sample; found in 14 of 14

2026 average: 3.3 ppm

The highest sample, in 2025, was 3.8 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its two samples averaged 3.3 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 4.2 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.24ppm

Highest yearly average, 2020 to 2025

2025 average: 0.24 ppm

Averaged by year, the highest was 0.24 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.29 ppm. In 2025, the latest year on file, its two samples averaged 0.24 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.31 ppm, in 2013.

What handles it

Chromium (total)

Comes from the source

Below EPA’s limits

2.5ppb

Highest yearly average, 2020

Averaged by year, the highest was 2.5 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.0 ppb. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 4.0 ppb, in 2013.

What handles it

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Haloacetic acids (HAA5)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Hardness

Very hard, typically 220 mg/L (12.9 grains per gallon), across 3 sampling points, in 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 11 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Uranium, nitrate, fluoride, chromium (total), arsenic, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Colorado’s own from 2020 on, with EPA’s national file for 2012 to 2019. Mountain View Village West’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Colorado’s results run from Feb. 12, 2020 to Feb. 3, 2026.

Testing your own tap

Mountain View Village West’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Colorado certifies.

The 3 labs Colorado certifies closest to the area Mountain View Village West serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eagle River W / S District

    Avon, CO · about 27 miles

    Certified for bacteria, lead and copper, metals, radioactivity

  • GeoWater Services

    Evergreen, CO · about 54 miles

    Certified for bacteria

  • Gilpin County Public Health Agency

    Black Hawk, CO · about 60 miles

    Certified for bacteria

All 54 certified labs for Colorado

Sources

PWSID CO0133150. Rebuilt from EPA data on Oct. 18, 2026.