Skip to content
TapBuff

Suburban Water Systems - San Jose

EPA’s and California’s records have results for 38 contaminants in its water; 12 were found.

Serves 170,523 people · Surface water bought from another system · Covina, CA · Hardness: varies by source

Serves
170,523 people
Connections
40,147
Water source
Surface water bought from another system
Based in
Covina, CA
County
Los Angeles
Owner
Private
Hardness
Varies by source
The 8 ZIP codes it serves

91723, 91744, 91745, 91748, 91789, 91790, 91791, 91792

The short answer

None of the results here is above a limit in force today. Nitrate is above the health goal. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from July 18, 2024 to April 10, 2025.

Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), uranium, chromium (total) and fluoride: California’s own results, samples taken from Jan. 9, 2020 to July 6, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Three other PFAS with no federal limit were found, the highest PFBA at 6.2 ppt: see them below.

Above the health goal, 1 result

Nitrate

Comes from the source

Above the health goal

16 ppm

Highest sample; found in 717 of 718

2026 average: 3.7 ppm

From 2020 to 2026, 13 samples were above EPA’s legal limit of 10 ppm, the highest 16 ppm in 2026. One came back under the limit on the next sample at the same point and 12 have no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. That was also the latest year on file, and its 57 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 12 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

56 ppb

Highest sample, April 10, 2025; found in 8 of 20

The highest sample was 56 ppb, about 5.6 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 7 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 24.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 5.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 24.7 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 100 ppb. In 2026, the latest year on file, its 75 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 31.5 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.5 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 1.5 ppb, in 2023, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.1 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.69 ppb, in 2014.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 7.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 7.5 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 23 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 9.8 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 3.7 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 2.7 ppb · Comes from the source

Averaged by year, the highest was 3.7 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 5.7 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.2 ppb, in 2013.

What handles it

About uranium
Chromium (total), Legal limit 100 ppb; highest yearly average 11.3 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 11.3 ppb, in 2023, below EPA’s legal limit of 100 ppb. Its highest single sample was 15 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 7.7 ppb, in 2014.

What handles it

About chromium (total)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.41 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.34 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.41 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.44 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.42 ppm, in 2017.

What handles it

About fluoride
PFBS, Health benchmark 2,000 ppt; highest 3.6 ppt

Highest sample, July 18, 2024; found in 1 of 20 · Comes from the source

The highest sample was 3.6 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 20 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 20 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 20 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 20 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 20 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.6 ppt highest, found in 1 of 20 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA6.2 ppt1 of 20None covers it
PFPeA3.5 ppt1 of 20None covers it
PFHxA3.3 ppt1 of 20None covers it
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Nitrate, Arsenic, Uranium

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Hard to very hard depending on the source, 147 to 290 mg/L (8.6 to 17 grains per gallon), across 6 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Suburban Water Systems - San Jose reported chloramine at 4 of its 7 sampling points and chlorine without chloramine at 3, in its 2024 to 2025 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported ozone and ultraviolet light.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), uranium, chromium (total) and fluoride results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Suburban Water Systems - San Jose’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from July 18, 2024 to April 10, 2025; California’s results run from Jan. 9, 2020 to July 6, 2026.

Testing your own tap

Suburban Water Systems - San Jose’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Suburban Water Systems - San Jose’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Suburban Water Systems - San Jose’s results flag: nitrate and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Suburban Water Systems - San Jose serves, or a kit by mail

The 3 labs California certifies closest to the area Suburban Water Systems - San Jose serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Weck Laboratories, Inc.

    City of Industry, CA · about 4 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (626) 336-2139

  • Eurofins Pomona

    Pomona, CA · about 6 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (626) 386-1100

  • Enviro-Chem, Inc.

    Pomona, CA · about 10 miles

    Certified for metals

    (909) 590-5905

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA1910205. Rebuilt from EPA data on Oct. 25, 2026.