Rancho California Water District
EPA’s and California’s records have results for 38 contaminants in its water; 16 were found.
Serves 146,147 people · Surface water bought from another system · Temecula, CA · Hardness: varies by source
- Serves
- 146,147 people
- Connections
- 44,355
- Water source
- Surface water bought from another system
- Based in
- Temecula, CA
- County
- Riverside
- Owner
- Local government
- Hardness
- Varies by source
The short answer
None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. Nitrate is above the health goal. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from March 9, 2023 to Dec. 13, 2024.
Nitrate, arsenic, total trihalomethanes (TTHM), fluoride, uranium, haloacetic acids (HAA5) and chromium (total): California’s own results, samples taken from Jan. 2, 2020 to July 9, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFBA at 7.8 ppt: see them below.
Above EPA’s new limit, which takes effect in 2029, 2 results
PFOS
Comes from the source
16 ppt
Highest sample, March 23, 2023; found in 6 of 77
The highest sample was 16 ppt, about 4 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 13.5 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
PFOA
Comes from the source
11 ppt
Highest sample, March 23, 2023; found in 8 of 77
The highest sample was 11 ppt, about 2.8 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 10.5 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
Above the health goal, 1 result
Nitrate
Comes from the source
11 ppm
Highest sample; found in 381 of 449
2026 average: 2.1 ppm
One sample, in 2023, was above EPA’s legal limit of 10 ppm, at 11 ppm. The next sample at the same point, within 30 days, brought the average back under the limit. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its 46 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 6.6 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
44 ppb
Highest sample, March 23, 2023; found in 15 of 78
The highest sample was 44 ppb, about 4.4 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 8 results
Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFHxS, EPA’s 2029 limit 10 ppt; highest 6.7 ppt
Highest sample, March 23, 2023; found in 3 of 77 · Comes from the source
The highest sample was 6.7 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 5.5 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 5.0 ppb · Comes from the source
Averaged by year, the highest was 5.5 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 26 ppb. In 2026, the latest year on file, its 200 samples averaged below the limit. EPA recorded no violation for arsenic at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 5.2 ppb, in 2016.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 32.2 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 29.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 32.2 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 89 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 30.8 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.99 ppm
Highest yearly average, 2020 to 2026 · 2026 average: 0.95 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.99 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 3.6 ppm. In 2026, the latest year on file, its 115 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 6.1 ppb
Highest yearly average, 2020 to 2026 · 2026, one sample: 1.5 ppb · Comes from the source
Averaged by year, the highest was 6.1 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 11.3 ppb. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 9.5 ppb, in 2013.
What handles it
- NSF/ANSI 58 look for “Uranium”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 7.6 ppb
Highest yearly average, 2020 to 2026 · Forms or is added in treatment
Averaged by year, the highest was 7.6 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 33 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 10.4 ppb, in 2014.
What handles it
No certification claim covers this compound yet.
Chromium (total), Legal limit 100 ppb; highest yearly average 1.0 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 0.11 ppb · Comes from the source
Averaged by year, the highest was 1.0 ppb, in 2023, below EPA’s legal limit of 100 ppb. Its highest single sample was 13 ppb. In 2026, the latest year on file, its 10 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.7 ppb, in 2014.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
PFBS, Health benchmark 2,000 ppt; highest 7.3 ppt
Highest sample, March 23, 2023; found in 5 of 77 · Comes from the source
The highest sample was 7.3 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Above EPA’s new limit (2029)11 ppt highest, found in 8 of 77 samples. Details |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)16 ppt highest, found in 6 of 77 samples. Details |
| PFHxS | 10 ppt | Below EPA’s limits6.7 ppt highest, found in 3 of 77 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 77 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 77 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits7.3 ppt highest, found in 5 of 77 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Below EPA’s limits0.59 at its highest sampling location, Well #102 |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFBA | 7.8 ppt | 4 of 77 | None covers it |
| PFPeA | 7.7 ppt | 4 of 77 | None covers it |
| PFHxA | 6.6 ppt | 5 of 77 | None covers it |
| PFHpA | 3.3 ppt | 1 of 77 | NSF/ANSI 53: Total PFAS Reduction |
22 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFDA
- PFDoA
- PFEESA
- PFHpS
- PFMBA
- PFMPA
- PFNA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claims: PFOS Reduction, PFOA Reduction, Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction
For: PFOS, PFOA, Nitrate, Arsenic
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)
Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Nitrate/Nitrite Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium
For: PFOS, PFOA, Nitrate, Arsenic, Uranium
Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: PFOS, PFOA, Nitrate; also arsenic, found below its limits
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: PFOS, PFOA, Nitrate; also arsenic, found below its limits
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: PFOS, PFOA, Nitrate
2 more filters
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOS, PFOA
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOS, PFOA
Every filter for these, those that cover all 3 first
Hardness
Soft to very hard depending on the source, 5.1 to 370 mg/L (0.3 to 21.6 grains per gallon), across 45 sampling points, 2019 to 2026.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Rancho California Water District reported chloramine at 2 of its 39 sampling points and chlorine without chloramine at 37, in its 2023 to 2024 sampling for EPA. Which one reaches your tap can depend on where you live.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Nitrate, arsenic, total trihalomethanes (TTHM), fluoride, uranium, haloacetic acids (HAA5) and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Rancho California Water District’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 9, 2023 to Dec. 13, 2024; California’s results run from Jan. 2, 2020 to July 9, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Rancho California Water District’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Rancho California Water District’s results flag: PFOS, PFOA, nitrate and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Rancho California Water District serves, or a kit by mail
The 3 labs California certifies closest to the area Rancho California Water District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Applied Industrial Microbiology, Inc.
Vista, CA · about 27 miles
Certified for bacteria, nitrate
Alpha Analytical Laboratories, Inc. - San Diego
Vista, CA · about 28 miles
Certified for bacteria, nitrate, minerals and other inorganics
Sierra Analytical Labs, Inc.
Laguna Hills, CA · about 29 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 4 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOS
- Get the utility’s own reportRancho California Water District must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- California State Water Resources Control Board, Division of Drinking Water, results from Jan. 1, 2020 to July 17, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: California State Water Resources Control Board, ELAP accredited laboratories and their fields of accreditation, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: California State Water Resources Control Board, Division of Drinking Water, results from Jan. 9, 2019 to June 18, 2026, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID CA3310038. Rebuilt from EPA data on Oct. 25, 2026.