Skip to content
TapBuff

City of Corona

EPA’s and California’s records have results for 38 contaminants in its water; 13 were found.

Serves 169,380 people · Surface water bought from another system · Corona, CA · Hardness: hard

Serves
169,380 people
Connections
45,209
Water source
Surface water bought from another system
Based in
Corona, CA
County
Riverside
Owner
Local government
Hardness
Hard
The 7 ZIP codes it serves

92877, 92878, 92879, 92880, 92881, 92882, 92883

The short answer

Nitrate averaged above its legal limit’s level in 2022, with no violation recorded. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Sept. 20, 2023 to Sept. 11, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2005 to 2026.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.8 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.

Nitrate, uranium, arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and chromium (total): California’s own results, samples taken from Jan. 2, 2020 to July 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Three other PFAS with no federal limit were found, the highest PFBA at 7.6 ppt: see them below.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Above the limit’s level, no violation recorded, 1 result

Nitrate

Comes from the source

Above the limit’s level, no violation

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

22 ppm

Highest sample; found in 6,586 of 6,935

2026 average: 5.1 ppm

From 2020 to 2022, at least 25 samples were above EPA’s legal limit of 10 ppm, the highest 22 ppm in 2022. The next sample at the same point, within 30 days, kept the average above the limit every time. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its 555 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 58.8 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

55.1 ppb

Highest sample, Dec. 14, 2023; found in 24 of 54

The highest sample was 55.1 ppb, about 5.5 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 8 results

Uranium, arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 19.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 9.2 ppb · Comes from the source

Averaged by year, the highest was 19.1 ppb, in 2022, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 34.3 ppb. In 2026, the latest year on file, its three samples averaged below the limit. EPA recorded no violation for uranium at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 22.1 ppb, in 2019.

What handles it

About uranium
PFHxS, EPA’s 2029 limit 10 ppt; highest 3.3 ppt

Highest sample, Sept. 20, 2023; found in 1 of 54 · Comes from the source

The highest sample was 3.3 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.5 ppb · Comes from the source

Averaged by year, the highest was 2.7 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 13 ppb. In 2026, the latest year on file, its 15 samples averaged below the limit. EPA recorded no violation for arsenic at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.1 ppb, in 2018.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 15.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 11.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 15.9 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 63 ppb. In 2026, the latest year on file, its 31 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 16.3 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.8 ppb

90th percentile, 2024 to 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.8 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 7.0 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 7.0 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 12 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.3 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.29 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.28 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.29 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 2.3 ppm. In 2026, the latest year on file, its 102 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.48 ppm, in 2013.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 1.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.42 ppb · Comes from the source

Averaged by year, the highest was 1.1 ppb, in 2025, below EPA’s legal limit of 100 ppb. Its highest single sample was 6.8 ppb. In 2026, the latest year on file, its 15 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.43 ppb, in 2013.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 54 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 54 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits3.3 ppt highest, found in 1 of 54 samples. Details
PFNA10 pptNot foundNot found in any of 54 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 54 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 54 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA7.6 ppt2 of 54None covers it
PFPeA6.1 ppt4 of 54None covers it
PFHxA3.8 ppt1 of 54None covers it
25 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Uranium, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, Uranium, Arsenic, Lead

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Hard on average, 146 mg/L (8.5 grains per gallon), ranging from 7.2 to 290 mg/L, in its 2026 water quality report.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Corona reported chloramine at 12 of its 15 sampling points and chlorine without chloramine at 3, in its 2023 to 2024 sampling for EPA. Which one reaches your tap can depend on where you live.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 68 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, uranium, arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Corona’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Sept. 20, 2023 to Sept. 11, 2024; California’s results run from Jan. 2, 2020 to July 15, 2026.

Testing your own tap

City of Corona’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Corona’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 1.8 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Corona’s results flag: nitrate and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area City of Corona serves, or a kit by mail

The 3 labs California certifies closest to the area City of Corona serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Western Analytical Laboratories, Inc.

    Chino, CA · about 14 miles

    Certified for bacteria, minerals and other inorganics

    (909) 627-3628

  • A & R Laboratories, Inc.

    Ontario, CA · about 14 miles

    Certified for bacteria

    (951) 779-0310

  • Babcock Laboratories, Inc.

    Riverside, CA · about 16 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (951) 653-3351

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA3310037. Rebuilt from EPA data on Oct. 25, 2026.