Skip to content
TapBuff

Lynwood - City, Water Dept.

EPA’s and California’s records have results for 38 contaminants in its water; 12 were found.

Serves 66,967 people · Surface water bought from another system · Lynwood, CA · Hardness: very hard

Serves
66,967 people
Connections
9,340
Water source
Surface water bought from another system
Based in
Lynwood, CA
County
Los Angeles
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

90262, 90280

The short answer

None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Sept. 12, 2024 to June 26, 2025.

Arsenic, nitrate, uranium, total trihalomethanes (TTHM), fluoride, chromium (total) and haloacetic acids (HAA5): California’s own results, samples taken from Jan. 14, 2020 to April 14, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA and PFHxS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. One other PFAS with no federal limit was found, the highest PFPeA at 3.3 ppt: see it below.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

23 ppt

Highest sample, April 24, 2025; found in 8 of 14

The highest sample was 23 ppt, about 5.8 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 22 ppt, also above it.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

7.8 ppt

Highest sample, April 24, 2025; found in 6 of 14

The highest sample was 7.8 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 7.0 ppt, also above it.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

49 ppb

Highest sample, Dec. 12, 2024; found in 4 of 14

The highest sample was 49 ppb, about 4.9 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 8 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
PFHxS, EPA’s 2029 limit 10 ppt; highest 6.1 ppt

Highest sample, April 24, 2025; found in 6 of 14 · Comes from the source

The highest sample was 6.1 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 5.3 ppb

Highest yearly average, 2020 to 2025 · 2025 average: 2.7 ppb · Comes from the source

Averaged by year, the highest was 5.3 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 5.4 ppb. In 2025, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.8 ppb, in 2014.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 2.2 ppm

Highest sample; found in 35 of 35 · 2026 average: 1.1 ppm · Comes from the source

The highest sample, in 2021, was 2.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.4 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 5.2 ppb

Highest yearly average, 2021 to 2024 · 2024 average: 4.8 ppb · Comes from the source

Averaged by year, the highest was 5.2 ppb, in 2021, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 6.9 ppb. In 2024, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.3 ppb, in 2018.

What handles it

About uranium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 12.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 5.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 12.1 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 49.7 ppb. In 2026, the latest year on file, its 21 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 19.7 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.35 ppm

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.35 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.37 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.38 ppm, in 2018.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 7.0 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 7.0 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 11 ppb. In 2025, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12 ppb, in 2018.

What handles it

About chromium (total)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.19 ppb · Forms or is added in treatment

Averaged by year, the highest was 2.7 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 10.3 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.1 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)7.8 ppt highest, found in 6 of 14 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)23 ppt highest, found in 8 of 14 samples. Details
PFHxS10 pptBelow EPA’s limits6.1 ppt highest, found in 6 of 14 samples. Details
PFNA10 pptNot foundNot found in any of 14 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 14 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA3.3 ppt2 of 14None covers it
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: PFOS, PFOA, Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Very hard, typically 270 mg/L (15.8 grains per gallon), across 5 sampling points, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, uranium, total trihalomethanes (TTHM), fluoride, chromium (total) and haloacetic acids (HAA5) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Lynwood - City, Water Dept.’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Sept. 12, 2024 to June 26, 2025; California’s results run from Jan. 14, 2020 to April 14, 2026.

Testing your own tap

Lynwood - City, Water Dept.’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Lynwood - City, Water Dept.’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Lynwood - City, Water Dept.’s results flag: PFOS, PFOA and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Lynwood - City, Water Dept. serves, or a kit by mail

The 3 labs California certifies closest to the area Lynwood - City, Water Dept. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Los Angeles County Public Health Laboratory

    Downey, CA · about 2 miles

    Certified for bacteria

    (562) 658-1300

  • Michelson Laboratories, Inc.

    Commerce, CA · about 4 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (562) 928-0553

  • SGS Forensic Laboratories

    Carson, CA · about 6 miles

    Certified for metals

    (310) 763-2374

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA1910079. Rebuilt from EPA data on Oct. 25, 2026.