Los Angeles Cwwd 40, R 24,27,33 - Pearblsm
EPA’s and California’s records have results for 13 contaminants in its water; 7 were found.
Serves 11,609 people · Surface water bought from another system · Alhambra, CA · Hardness: varies by source
- Serves
- 11,609 people
- Connections
- 3,027
- Water source
- Surface water bought from another system
- Based in
- Alhambra, CA
- County
- Los Angeles
- Owner
- Local government
- Hardness
- Varies by source
The short answer
Nitrate averaged above its legal limit’s level in 2022, with no violation recorded. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Sept. 4 to 4, 2024.
Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, fluoride, chromium (total) and arsenic: California’s own results, samples taken from Jan. 6, 2020 to May 20, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the zero PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other four PFAS tested for was found either.
Above the limit’s level, no violation recorded, 1 result
Nitrate
Comes from the source
What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.
13 ppm
Highest sample; found in 236 of 265
2025, one sample: 0.74 ppm
From 2020 to 2022, 23 samples were above EPA’s legal limit of 10 ppm, the highest 13 ppm in 2022. The next sample at the same point, within 30 days, kept the average above the limit for 11; 12 have no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. In 2025, the latest year on file, its one sample was below the limit. EPA recorded no violation for nitrate at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 13.4 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
16.3 ppb
One sample, Sept. 4, 2024
The sample was 16.3 ppb, above EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 5 results
Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 56.3 ppb
Highest yearly average, 2020 to 2026 · Forms or is added in treatment
Averaged by year, the highest was 56.3 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 69 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 32.5 ppb, in 2013.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 16.5 ppb
Highest yearly average, 2020 to 2026 · Forms or is added in treatment
Averaged by year, the highest was 16.5 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 20 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 10.6 ppb, in 2013.
What handles it
No certification claim covers this compound yet.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 3.6 ppb
Highest yearly average, 2020 to 2025 · 2025 average: 3.1 ppb · Comes from the source
Averaged by year, the highest was 3.6 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2025, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 3.8 ppb, in 2012.
What handles it
- NSF/ANSI 58 look for “Uranium”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.22 ppm
Highest yearly average, 2020 to 2025 · 2025 average: 0.17 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.22 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.23 ppm. In 2025, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Chromium (total), Legal limit 100 ppb; highest yearly average 3.0 ppb
Highest yearly average, 2020 to 2025 · Comes from the source
Averaged by year, the highest was 3.0 ppb, in 2025, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.4 ppb. That was also the latest year on file.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
6 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- NEtFOSAA
- NMeFOSAA
- PFTA
- PFTrDA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claim: Nitrate/Nitrite (30 ppm challenge)
For: Nitrate
- NSF/ANSI 58
Claims: Nitrate/Nitrite Reduction, Uranium
For: Nitrate, Uranium
Other claims that cover it: Nitrate
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Nitrate
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Nitrate
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: Nitrate
Hardness
Moderately hard to very hard depending on the source, 115 to 249 mg/L (6.7 to 14.6 grains per gallon), across 4 sampling points, 2019 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Los Angeles Cwwd 40, R 24,27,33 - Pearblsm reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 sampling for EPA.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, fluoride, chromium (total) and arsenic results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Los Angeles Cwwd 40, R 24,27,33 - Pearblsm’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Sept. 4 to 4, 2024; California’s results run from Jan. 6, 2020 to May 20, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Los Angeles Cwwd 40, R 24,27,33 - Pearblsm’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Los Angeles Cwwd 40, R 24,27,33 - Pearblsm’s results flag: nitrate and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Los Angeles Cwwd 40, R 24,27,33 - Pearblsm serves, or a kit by mail
The 3 labs California certifies closest to the area Los Angeles Cwwd 40, R 24,27,33 - Pearblsm serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Pat-Chem Laboratories
San Fernando, CA · about 8 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity
Positive Lab Service
Los Angeles, CA · about 19 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
EMSL Analytical, Inc. (LA Testing)
South Pasadena, CA · about 21 miles
Certified for bacteria, asbestos
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with nitrate
- Get the utility’s own reportLos Angeles Cwwd 40, R 24,27,33 - Pearblsm must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- California State Water Resources Control Board, Division of Drinking Water, results from Jan. 1, 2020 to July 17, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: California State Water Resources Control Board, ELAP accredited laboratories and their fields of accreditation, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: California State Water Resources Control Board, Division of Drinking Water, results from Aug. 12, 2019 to Nov. 18, 2025, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID CA1910203. Rebuilt from EPA data on Oct. 25, 2026.
Towns it serves
Also in Los Angeles County
- Los Angeles - City, Dept. of Water & Power3.9 million
- Long Beach Utilities Department466,772
- Los Angeles Cwwd 40, Reg. 38 - Lake la12,582
- Signal Hill - City, Water Dept.11,848
- City of Bell Gardens11,413
- Sierra Madre - City, Water Dept.11,000