Lomita - City, Water Dept.
EPA’s and California’s records have results for 38 contaminants in its water; 6 were found.
Serves 20,256 people · Surface water bought from another system · Lomita, CA · Hardness: very hard
- Serves
- 20,256 people
- Connections
- 4,490
- Water source
- Surface water bought from another system
- Based in
- Lomita, CA
- County
- Los Angeles
- Owner
- Local government
- Hardness
- Very hard
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. PFOS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from July 2, 2024 to Jan. 6, 2026.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, chromium (total), nitrate and uranium: California’s own results, samples taken from Jan. 2, 2020 to May 12, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: PFOS and PFHxS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.
A sample above EPA’s 2029 limit, below it on average, 1 result
PFOS
Comes from the source
4.3 ppt
Highest sample, July 1, 2025; found in 1 of 3
The highest sample was 4.3 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.1 ppt, below it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
67.4 ppb
Highest sample, July 2, 2024; found in 3 of 3
The highest sample was 67.4 ppb, about 6.7 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 39.6 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 31 ppb · Forms or is added in treatment
Averaged by year, the highest was 39.6 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 72.8 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 51.2 ppb, in 2014, and EPA recorded a violation in 2016.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
PFHxS, EPA’s 2029 limit 10 ppt; highest 4.1 ppt
Highest sample, July 1, 2025; found in 1 of 3 · Comes from the source
The highest sample was 4.1 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 14.9 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 7.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 14.9 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 31.5 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 17.4 ppb, in 2014.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.32 ppm
Highest yearly average, 2025 · Forms or is added in treatment
Averaged by year, the highest was 0.32 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.39 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Not foundNot found in any of 3 samples, below 4 ppt |
| PFOS | 4.0 ppt | A sample above EPA’s 2029 limit4.3 ppt highest, found in 1 of 3 samples. Details |
| PFHxS | 10 ppt | Below EPA’s limits4.1 ppt highest, found in 1 of 3 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 3 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 3 samples, below 5 ppt |
| PFBS | Index only | Not foundNot found in any of 3 samples, below 3 ppt |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Doesn’t applyDoesn’t apply: no sampling location found two or more of the four |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
32 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
- Nitrate
- Uranium
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claim: PFOS Reduction
For: PFOS
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claim: Perfluorooctane Sulfonate (PFOS)
For: PFOS
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOS
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOS
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOS
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOS
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOS
Hardness
Very hard, 340 mg/L (19.9 grains per gallon), at its one sampling point, 2019 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Lomita - City, Water Dept. reported chloramine in some sampling rounds and not in others, in its 2024 to 2026 sampling for EPA. Of its 2 sampling points, 1 in some rounds only, and no disinfectant at 1. CDC says some utilities switch between chlorine and chloramine with the seasons.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
1 health-based violation since 2016 for TTHM. It began April 1, 2016.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | April 1, 2016 to June 30, 2016, 82.1 ppb | Resolved |
Health-based violations only. 1 monitoring or reporting violation not shown.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, chromium (total), nitrate and uranium results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Lomita - City, Water Dept.’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from July 2, 2024 to Jan. 6, 2026; California’s results run from Jan. 2, 2020 to May 12, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Lomita - City, Water Dept.’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Lomita - City, Water Dept.’s results flag: PFOS and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Lomita - City, Water Dept. serves, or a kit by mail
The 3 labs California certifies closest to the area Lomita - City, Water Dept. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
EMAX Laboratories, Inc.
Torrance, CA · about 2 miles
Certified for nitrate, minerals and other inorganics, organic chemicals, disinfection byproducts
Applied Microbiological Services (AMS)
Long Beach, CA · about 6 miles
Certified for bacteria
JK BioScience Inc.
Rancho Dominguez, CA · about 6 miles
Certified for bacteria, lead and copper, metals
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOS
- Get the utility’s own reportLomita - City, Water Dept. must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- California State Water Resources Control Board, Division of Drinking Water, results from Jan. 1, 2020 to July 17, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: California State Water Resources Control Board, ELAP accredited laboratories and their fields of accreditation, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: California State Water Resources Control Board, Division of Drinking Water, results from May 28, 2019 to Feb. 18, 2025, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID CA1910073. Rebuilt from EPA data on Oct. 25, 2026.
Towns it serves
Also in Los Angeles County
- Los Angeles - City, Dept. of Water & Power3.9 million
- Long Beach Utilities Department466,772
- Cal/Am Water Company - Baldwin Hills20,724
- Norwalk - City, Water Dept.20,283
- Quartz Hill Water Dist.19,322
- Santa Fe Springs - City, Water Dept.19,219