Skip to content
TapBuff
ZIP

Leisure Pines Mutual Water Co

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
340 people
Connections
105
Water source
Groundwater
Based in
Twain Harte, CA
County
Tuolumne
Owner
Private
Hardness
Varies by source
The ZIP code it serves

95383

The short answer

2 results are above the health goal. The worst: Lead, above the health goal. 1 health-based violation since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2005 to 2022.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.5 ppm, for the period ending Dec. 31, 1994. None since is on file, so it is not counted as a current finding.

Uranium, nitrate, chromium (total), fluoride, arsenic and total trihalomethanes (TTHM): California’s own results, samples taken from Dec. 7, 2020 to June 17, 2026, with EPA’s 2012 to 2019 file for earlier years.

Haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from March 26, 2012 to Sept. 9, 2015. Newer results are in the utility’s annual water quality report.

Above the health goal2

Lead

Comes from pipes, often your own

Above the health goal

12.6ppb

90th percentile, 2020 to 2022

In the latest period, 9 in 10 homes sampled were at or below 12.6 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Uranium

Comes from the source

Above the health goal

2.5ppb

Highest yearly average, 2020

Averaged by year, the highest was 2.5 ppb, in 2020: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That is the only year on file.

What handles it

Below EPA’s limits3

Nitrate

Comes from the source

Below EPA’s limits

4.0ppm

Highest sample; found in 14 of 19

2026: not found

The highest sample, in 2024, was 4.0 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.7 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Chromium (total)

Comes from the source

Below EPA’s limits

4.0ppb

Highest yearly average, 2021 to 2025

2025: not found

Averaged by year, the highest was 4.0 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 4.5 ppb. In 2025, the latest year on file, it wasn’t found in its one sample.

What handles it

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.073ppm

Highest yearly average, 2021 to 2025

2025: not found

Averaged by year, the highest was 0.073 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.14 ppm. In 2025, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.25 ppm, in 2016.

What handles it

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Haloacetic acids (HAA5)
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Hardness

Soft to moderately hard depending on the source, 53 to 120 mg/L (3.1 to 7 grains per gallon), across 3 sampling points, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared, salt includedSoftener or salt-free conditioner?California water hardness, utility by utility

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024—Unaddressed
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 3 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Uranium, nitrate, chromium (total), fluoride, arsenic and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Haloacetic acids (HAA5) comes from EPA’s file alone, which ends in 2019. Leisure Pines Mutual Water Co’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Dec. 7, 2020 to June 17, 2026; EPA’s compliance samples are from March 26, 2012 to Sept. 9, 2015.

Testing your own tap

Leisure Pines Mutual Water Co’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Leisure Pines Mutual Water Co serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Precision Enviro-Tech

    Twain Harte, CA · about 5 miles

    Certified for bacteria

    (209) 477-8105

  • 49er Water Laboratory

    Jackson, CA · about 34 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (530) 277-2770

  • Aemtek, Inc.

    Modesto, CA · about 51 miles

    Certified for bacteria

    (510) 979-1979

All 145 certified labs for California

Sources

PWSID CA5500053. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Tuolumne County

All California utilities

What to do next