Skip to content
TapBuff

Peppermint Creek MHP

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
280 people
Connections
100
Water source
Surface water
Based in
Stockton, CA
County
Tuolumne
Owner
Private
Hardness
Moderately hard
The ZIP code it serves

95327

The short answer

1 result is above EPA’s legal limit. The worst: Haloacetic acids (HAA5), above the legal limit. 3 health-based violations since 2016.

What was found

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic and chromium (total): California’s own results, samples taken from Oct. 5, 2020 to May 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the legal limit1

Haloacetic acids (HAA5)

Forms or is added in treatment

Above the legal limit

75.7ppb

Highest yearly average, 2020 to 2026

Averaged by year, the highest was 75.7 ppb, in 2026, above EPA’s legal limit of 60 ppb. Its highest single sample was 123 ppb. That was also the latest year on file. EPA recorded violations for haloacetic acids (HAA5) at this utility in 2025 and 2026. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 45.6 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

Below EPA’s limits3

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

58.6ppb

Highest yearly average, 2020 to 2025

2025, one sample: 54.6 ppb

Averaged by year, the highest was 58.6 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 62.3 ppb. In 2025, the latest year on file, its one sample was 54.6 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 50.4 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.1ppm

Highest yearly average, 2020 to 2026

2026: not found

Averaged by year, the highest was 0.1 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.18 ppm, in 2018.

What handles it

Nitrate

Comes from the source

Below EPA’s limits

0.23ppm

Highest sample; found in 1 of 6

2026: not found

The highest sample, in 2020, was 0.23 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.62 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead

Hardness

Moderately hard, 63 mg/L (3.7 grains per gallon), at its one sampling point, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2026 to June 30, 202671.7 UG/LArchived
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2026 to March 31, 202679.6 UG/LArchived
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2025 to Dec. 31, 20250.066 MG/LArchived
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 7 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Peppermint Creek MHP’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Oct. 5, 2020 to May 5, 2026.

Testing your own tap

Peppermint Creek MHP’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Peppermint Creek MHP serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Precision Enviro-Tech

    Twain Harte, CA · about 18 miles

    Certified for bacteria

    (209) 477-8105

  • Aemtek, Inc.

    Modesto, CA · about 30 miles

    Certified for bacteria

    (510) 979-1979

  • Microbac Laboratories, Inc. - Turlock

    Turlock, CA · about 33 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (707) 822-4649

All 145 certified labs for California

Sources

PWSID CA5500116. Rebuilt from EPA data on Oct. 18, 2026.