Skip to content
TapBuff

Ivanhoe Public Utility Dist

EPA’s and California’s records have results for 37 contaminants in its water; 4 were found.

Serves 4,580 people · Groundwater · Ivanhoe, CA · Hardness: varies by source

Serves
4,580 people
Connections
1,128
Water source
Groundwater
Based in
Ivanhoe, CA
County
Tulare
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

93235

The short answer

Nitrate averaged above its legal limit’s level in 2020, with no violation recorded. 1 health-based violation since 2016, with no fix on record in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from June 28 to Dec. 20, 2023.

Nitrate, uranium, arsenic, fluoride, chromium (total) and total trihalomethanes (TTHM): California’s own results, samples taken from Feb. 21, 2020 to June 29, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the limit’s level, no violation recorded, 1 result

Nitrate

Comes from the source

Above the limit’s level, no violation

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

19 ppm

Highest sample; found in 111 of 111

2026 average: 10.5 ppm

From 2020 to 2026, at least 25 samples were above EPA’s legal limit of 10 ppm, the highest 19 ppm in 2020. The next sample at the same point, within 30 days, kept the average above the limit for 11; 14 have no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its 14 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 17.6 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Below EPA’s limits, 3 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 10.3 ppb

Highest yearly average, 2020 to 2025 · 2025, one sample: 7.9 ppb · Comes from the source

Averaged by year, the highest was 10.3 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 9.1 ppb, in 2017.

What handles it

About uranium
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 1.0 ppb · Comes from the source

Averaged by year, the highest was 1.1 ppb, in 2023, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.2 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.4 ppb, in 2018.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.18 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.13 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.18 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.19 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.18 ppm, in 2018.

What handles it

About fluoride
California utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Lead
  • Total trihalomethanes (TTHM)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for the Lead and Copper Rule Revisions. It began Oct. 17, 2024, and it has no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024No fix on recordEPA: unaddressed

Health-based violations only. 1 monitoring or reporting violation not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, Uranium, Arsenic

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Moderately hard to very hard depending on the source, 110 to 330 mg/L (6.4 to 19.3 grains per gallon), across 4 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Ivanhoe Public Utility Dist reported adding no disinfectant at all 4 of its sampling points, in its 2023 sampling for EPA.

What that means

Most utilities add chlorine or chloramine. CDC says some that draw groundwater don’t need a disinfectant, because testing shows the water doesn’t carry enough germs to make people sick. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, uranium, arsenic, fluoride, chromium (total) and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Ivanhoe Public Utility Dist’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 28 to Dec. 20, 2023; California’s results run from Feb. 21, 2020 to June 29, 2026.

Testing your own tap

Ivanhoe Public Utility Dist’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Ivanhoe Public Utility Dist’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Ivanhoe Public Utility Dist’s results flag: nitrate. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs California certifies closest to the area Ivanhoe Public Utility Dist serves, or a kit by mail

The 3 labs California certifies closest to the area Ivanhoe Public Utility Dist serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Fruit Growers Laboratory, Inc.

    Visalia, CA · about 10 miles

    Certified for bacteria

    (559) 734-9473

  • Sierra Dairy Laboratory

    Tulare, CA · about 14 miles

    Certified for bacteria

    (559) 686-2070

  • BSK Associates

    Fresno, CA · about 35 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (559) 497-2888

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA5410019. Rebuilt from EPA data on Oct. 25, 2026.