Cutler PUD
EPA’s and California’s records have results for 38 contaminants in its water; 5 were found.
Serves 6,200 people · Groundwater · Cutler, CA · Hardness: varies by source
- Serves
- 6,200 people
- Connections
- 1,234
- Water source
- Groundwater
- Based in
- Cutler, CA
- County
- Tulare
- Owner
- Local government
- Hardness
- Varies by source
The ZIP code it serves
The short answer
EPA recorded violations of the legal limit for nitrate here in 2023, 2024 and 2025. In 2026, the latest year on file, it averaged 8.0 ppm, below the limit. 5 health-based violations since 2016, none with a fix on record in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What handles itThe 5 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from April 10 to Nov. 19, 2024.
Nitrate, arsenic, uranium, total trihalomethanes (TTHM), fluoride, chromium (total) and haloacetic acids (HAA5): California’s own results, samples taken from Jan. 8, 2020 to July 1, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
A legal-limit violation on record, below the limit in the latest year, 1 result
Nitrate
Comes from the source
What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. A violation like this calls for a notice to customers within 24 hours. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.
11 ppm
Highest sample; found in 123 of 123
2026 average: 8.0 ppm
From 2023 to 2025, six samples were above EPA’s legal limit of 10 ppm, the highest 11 ppm in 2024. Five came back under the limit on the next sample at the same point and one has no follow-up sample on file within 30 days. In 2026, the latest year on file, its 10 samples averaged below the limit. EPA recorded violations for nitrate at this utility in 2023, 2024 and 2025.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 12.9 ppm, in 2012, and EPA recorded a violation in 2012.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Below EPA’s limits, 4 results
Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.0 ppb
Highest yearly average, 2022 to 2025 · 2025: not found · Comes from the source
Averaged by year, the highest was 2.0 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.1 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppb, in 2019.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 2.5 ppb
Highest yearly average, 2020 · Comes from the source
Averaged by year, the highest was 2.5 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 3.3 ppb
Highest yearly average, 2020 to 2025 · 2025, one sample: 2.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 3.3 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 4.4 ppb, in 2015.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.15 ppm
Highest yearly average, 2022 to 2025 · Forms or is added in treatment
Averaged by year, the highest was 0.15 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.16 ppm. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.16 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Chromium (total)
- Haloacetic acids (HAA5)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
5 health-based violations since 2016, 4 for nitrate and 1 for the Lead and Copper Rule Revisions. The latest began Jan. 1, 2025, and none has a fix on record in EPA’s file.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Nitrate | A sample was above the legal limit, for a contaminant judged one sample at a time.EPA: Maximum Contaminant Level Violation, Single Sample | Jan. 1, 2025 to March 31, 2025, 11 ppm | No fix on recordEPA: archived |
| Lead and Copper Rule Revisions | The required inventory of lead service lines was not completed or submitted on time.EPA: LSL Inventory | Oct. 17, 2024 | No fix on recordEPA: addressed |
| Nitrate | A sample was above the legal limit, for a contaminant judged one sample at a time.EPA: Maximum Contaminant Level Violation, Single Sample | April 1, 2024 to June 30, 2024, 11 ppm | No fix on recordEPA: archived |
| Jan. 1, 2024 to March 31, 2024, 11 ppm | No fix on recordEPA: archived | ||
| July 1, 2023 to Sept. 30, 2023, 10.5 ppm | No fix on recordEPA: archived |
Health-based violations only. 1 monitoring or reporting violation not shown.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction
For: Nitrate, Arsenic
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Nitrate/Nitrite Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium
For: Nitrate, Arsenic, Uranium
Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Nitrate; also arsenic, found below its limits
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Nitrate; also arsenic, found below its limits
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: Nitrate
2 more filters
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for arsenic only, found below its limits
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for arsenic only, found below its limits
Hardness
Hard to very hard depending on the source, 160 to 260 mg/L (9.4 to 15.2 grains per gallon), across 2 sampling points, 2019 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Cutler PUD reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2024 sampling for EPA. It also reported another disinfectant.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Nitrate, arsenic, uranium, total trihalomethanes (TTHM), fluoride, chromium (total) and haloacetic acids (HAA5) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Cutler PUD’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 10 to Nov. 19, 2024; California’s results run from Jan. 8, 2020 to July 1, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Cutler PUD’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Cutler PUD’s results flag: nitrate. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs California certifies closest to the area Cutler PUD serves, or a kit by mail
The 3 labs California certifies closest to the area Cutler PUD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Fruit Growers Laboratory, Inc.
Visalia, CA · about 13 miles
Certified for bacteria
Sierra Dairy Laboratory
Tulare, CA · about 20 miles
Certified for bacteria
BSK Associates
Fresno, CA · about 27 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on nitrateWhat it does to health, where it comes from, and the certification claim that addresses it.About nitrate
- Get the utility’s own reportCutler PUD must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- California State Water Resources Control Board, Division of Drinking Water, results from Jan. 1, 2020 to July 17, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: California State Water Resources Control Board, ELAP accredited laboratories and their fields of accreditation, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: California State Water Resources Control Board, Division of Drinking Water, results from Aug. 22, 2019 to July 11, 2025, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID CA5410001. Rebuilt from EPA data on Oct. 25, 2026.