Skip to content
TapBuff

Crescenta Valley CWD

EPA’s and California’s records have results for 38 contaminants in its water; 14 were found.

Serves 28,162 people · Surface water bought from another system · La Crescenta, CA · Hardness: varies by source

Serves
28,162 people
Connections
8,534
Water source
Surface water bought from another system
Based in
La Crescenta, CA
County
Los Angeles
Owner
Local government
Hardness
Varies by source
The 5 ZIP codes it serves

91011, 91020, 91046, 91208, 91214

The short answer

Nitrate averaged above its legal limit’s level in 2025, with no violation recorded. PFOA is above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 22 to Nov. 22, 2023.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.8 ppm, for the period ending June 30, 2008. None since is on file, so it is not counted as a current finding.

Nitrate, total trihalomethanes (TTHM), uranium, haloacetic acids (HAA5), arsenic, fluoride and chromium (total): California’s own results, samples taken from Jan. 7, 2020 to July 14, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFPeA at 8.0 ppt: see them below.

Above the limit’s level, no violation recorded, 1 result

Nitrate

Comes from the source

Above the limit’s level, no violation

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

14.4 ppm

Highest sample; found in 1,988 of 1,991

2026 average: 7.2 ppm

In 2025, at least 25 samples were above EPA’s legal limit of 10 ppm, the highest 14.4 ppm. The next sample at the same point, within 30 days, kept the average above the limit for 24; one has no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its 160 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOA

Comes from the source

Above EPA’s new limit (2029)

5.1 ppt

Highest sample, Feb. 22, 2023; found in 3 of 16

The highest sample was 5.1 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 4.6 ppt, also above it.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

45 ppb

Highest sample, Feb. 22, 2023; found in 5 of 16

The highest sample was 45 ppb, about 4.5 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 8 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 49.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 23.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 49.5 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 78.1 ppb. In 2026, the latest year on file, its 20 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 60.5 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 14.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 5.4 ppb · Comes from the source

Averaged by year, the highest was 14.9 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 17.9 ppb. In 2026, the latest year on file, its 10 samples averaged below the limit.

What handles it

About uranium
PFHxS, EPA’s 2029 limit 10 ppt; highest 4.9 ppt

Highest sample, Oct. 24, 2023; found in 6 of 16 · Comes from the source

The highest sample was 4.9 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 14.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 8.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 14.5 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 22 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 20.5 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.72 ppb

Highest yearly average, 2020 to 2025 · 2025 average: 0.38 ppb · Comes from the source

Averaged by year, the highest was 0.72 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 8.6 ppb. In 2025, the latest year on file, its 12 samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.22 ppm

Highest yearly average, 2020 to 2025 · 2025 average: 0.21 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.22 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.59 ppm. In 2025, the latest year on file, its 12 samples averaged below the limit.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 3.0 ppb

Highest yearly average, 2020 to 2025 · Comes from the source

Averaged by year, the highest was 3.0 ppb, in 2025, below EPA’s legal limit of 100 ppb. Its highest single sample was 36 ppb. That was also the latest year on file.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 6.8 ppt

Highest sample, Oct. 24, 2023; found in 9 of 16 · Comes from the source

The highest sample was 6.8 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)5.1 ppt highest, found in 3 of 16 samples. Details
PFOS4.0 pptNot foundNot found in any of 16 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits4.9 ppt highest, found in 6 of 16 samples. Details
PFNA10 pptNot foundNot found in any of 16 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 16 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits6.8 ppt highest, found in 9 of 16 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.47 at its highest sampling location, Combined Wells 1, 5, 7 & 9
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA8.0 ppt9 of 15None covers it
PFHxA8.0 ppt9 of 15None covers it
PFHpA3.1 ppt1 of 16NSF/ANSI 53: Total PFAS Reduction
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Perfluorooctanoic Acid (PFOA), Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, PFOA, Uranium, Arsenic

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for PFAS, ranked⁠

Hardness

Hard to very hard depending on the source, 140 to 360 mg/L (8.2 to 21.1 grains per gallon), across 12 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Crescenta Valley CWD reported chloramine at 1 of its 7 sampling points and chlorine without chloramine at 6, in its 2023 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported ozone.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), uranium, haloacetic acids (HAA5), arsenic, fluoride and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Crescenta Valley CWD’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 22 to Nov. 22, 2023; California’s results run from Jan. 7, 2020 to July 14, 2026.

Testing your own tap

Crescenta Valley CWD’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Crescenta Valley CWD’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Crescenta Valley CWD’s results flag: nitrate, PFOA and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Crescenta Valley CWD serves, or a kit by mail

The 3 labs California certifies closest to the area Crescenta Valley CWD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • EMSL Analytical, Inc. (LA Testing)

    South Pasadena, CA · about 8 miles

    Certified for bacteria, asbestos

    (323) 254-9960

  • Positive Lab Service

    Los Angeles, CA · about 13 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (213) 745-5312

  • Pat-Chem Laboratories

    San Fernando, CA · about 13 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (800) 400-5227

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA1910028. Rebuilt from EPA data on Oct. 25, 2026.