Skip to content
TapBuff

City of South Pasadena

EPA’s and California’s records have results for 38 contaminants in its water; 7 were found.

Serves 25,329 people · Surface water bought from another system · South Pasadena, CA · Hardness: varies by source

Serves
25,329 people
Connections
6,142
Water source
Surface water bought from another system
Based in
South Pasadena, CA
County
Los Angeles
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

91030

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for uranium and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 9 to July 11, 2024.

Nitrate, uranium, fluoride, arsenic, chromium (total), total trihalomethanes (TTHM) and haloacetic acids (HAA5): California’s own results, samples taken from Jan. 7, 2020 to July 7, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 7 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 10 ppm

Highest sample; found in 332 of 336 · 2026 average: 5.4 ppm · Comes from the source

The highest sample, in 2022, was 10 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 35 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 11.8 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 8.3 ppb

Highest yearly average, 2022 to 2023 · Comes from the source

Averaged by year, the highest was 8.3 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 8.8 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.4 ppb, in 2016.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.79 ppm

Highest yearly average, 2021 to 2025 · 2025 average: 0.72 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.79 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. In 2025, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppm, in 2018.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.1 ppb

Highest yearly average, 2021 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 1.1 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.6 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.83 ppb, in 2018.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Chromium (total), Legal limit 100 ppb; highest yearly average 3.1 ppb

Highest yearly average, 2021 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 3.1 ppb, in 2022, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.8 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples.

What handles it

About chromium (total)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 1.4 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.38 ppb · Forms or is added in treatment

Averaged by year, the highest was 1.4 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 13 ppb. In 2026, the latest year on file, its 11 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 18.3 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.38 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 0.38 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 1.6 ppb. In 2026, the latest year on file, it wasn’t found in any of its eight samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.3 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
California utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Uranium, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

Hardness

Hard to very hard depending on the source, 140 to 290 mg/L (8.2 to 17 grains per gallon), across 3 sampling points, 2021 to 2022.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of South Pasadena reported adding chloramine before water enters its pipes, at all 3 of its sampling points, in its 2024 sampling for EPA. It also reported ozone.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, uranium, fluoride, arsenic, chromium (total), total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of South Pasadena’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 9 to July 11, 2024; California’s results run from Jan. 7, 2020 to July 7, 2026.

Testing your own tap

City of South Pasadena’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of South Pasadena’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs California certifies closest to the area City of South Pasadena serves, or a kit by mail

The 3 labs California certifies closest to the area City of South Pasadena serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • EMSL Analytical, Inc. (LA Testing)

    South Pasadena, CA · about 1 mile

    Certified for bacteria, asbestos

    (323) 254-9960

  • Positive Lab Service

    Los Angeles, CA · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (213) 745-5312

  • Michelson Laboratories, Inc.

    Commerce, CA · about 9 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (562) 928-0553

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA1910154. Rebuilt from EPA data on Oct. 25, 2026.