Skip to content
TapBuff

Burbank - City, Water Dept.

EPA’s and California’s records have results for 38 contaminants in its water; 11 were found.

Serves 106,146 people · Surface water bought from another system · Burbank, CA · Hardness: very hard

Serves
106,146 people
Connections
25,923
Water source
Surface water bought from another system
Based in
Burbank, CA
County
Los Angeles
Owner
Local government
Hardness
Very hard
The 6 ZIP codes it serves

91501, 91502, 91503, 91504, 91505, 91506

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for uranium, lead and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 1, 2024 to Feb. 3, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2005 to 2026.

Nitrate, uranium, fluoride, total trihalomethanes (TTHM), chromium (total), haloacetic acids (HAA5) and arsenic: California’s own results, samples taken from Jan. 3, 2020 to July 13, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. Three other PFAS with no federal limit were found, the highest PFPeA at 10.2 ppt: see them below.

Below EPA’s limits, 8 results

Uranium, lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Nitrate, Legal limit 10 ppm; highest 9.8 ppm

Highest sample; found in 1,288 of 1,289 · 2026 average: 5.6 ppm · Comes from the source

The highest sample, in 2020, was 9.8 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 104 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 12 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 21.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 21.3 ppb · Comes from the source

Averaged by year, the highest was 21.7 ppb, in 2025, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 29.8 ppb. In 2026, the latest year on file, its 29 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 22.4 ppb, in 2018.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.51 ppm

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 0.51 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.63 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.56 ppm, in 2014.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 7.7 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 7.7 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 30 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.6 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 6.2 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 6.2 ppb, in 2026, below EPA’s legal limit of 100 ppb. Its highest single sample was 31 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.8 ppb, in 2014.

What handles it

About chromium (total)
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.86 ppb

90th percentile, 2024 to 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.86 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.5 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 2.5 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 8.1 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.6 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.37 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.33 ppb · Comes from the source

Averaged by year, the highest was 0.37 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.0 ppb. In 2026, the latest year on file, its 42 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.37 ppb, in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA10.2 ppt4 of 4None covers it
PFBA8.1 ppt4 of 4None covers it
PFHxA4.4 ppt3 of 4None covers it
27 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 5 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Uranium, Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Uranium, Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Very hard, typically 330 mg/L (19.3 grains per gallon), across 10 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Burbank - City, Water Dept. reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 to 2025 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, uranium, fluoride, total trihalomethanes (TTHM), chromium (total), haloacetic acids (HAA5) and arsenic results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Burbank - City, Water Dept.’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 1, 2024 to Feb. 3, 2025; California’s results run from Jan. 3, 2020 to July 13, 2026.

Testing your own tap

Burbank - City, Water Dept.’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Burbank - City, Water Dept.’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0.86 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs California certifies closest to the area Burbank - City, Water Dept. serves, or a kit by mail

The 3 labs California certifies closest to the area Burbank - City, Water Dept. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • EMSL Analytical, Inc. (LA Testing)

    South Pasadena, CA · about 10 miles

    Certified for bacteria, asbestos

    (323) 254-9960

  • Pat-Chem Laboratories

    San Fernando, CA · about 10 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (800) 400-5227

  • Positive Lab Service

    Los Angeles, CA · about 12 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (213) 745-5312

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA1910179. Rebuilt from EPA data on Oct. 25, 2026.