Riverview Water Works
EPA’s and Alabama’s records have results for 37 contaminants in its water; 5 were found.
Serves 903 people · Groundwater · East Brewton, AL · Hardness: moderately hard
- Serves
- 903 people
- Connections
- 301
- Water source
- Groundwater
- Based in
- East Brewton, AL
- County
- Escambia
- Owner
- Local government
- Hardness
- Moderately hard
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from March 6 to Sept. 11, 2023.
Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic and chromium (total): Alabama’s own results, samples taken from April 28, 2020 to July 27, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
15.8 ppb
Highest sample, Sept. 11, 2023; found in 2 of 2
The highest sample was 15.8 ppb, above EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.48 ppm
Highest yearly average, 2022 to 2025 · 2025, one sample: 0.098 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.48 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.51 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 5.8 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 5.7 ppb · Forms or is added in treatment
Averaged by year, the highest was 5.8 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 8.3 ppb. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 4.8 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.1 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 1.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 3.1 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 4.6 ppb. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.7 ppb, in 2014.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.34 ppm
Highest sample; found in 2 of 7 · 2026: not found · Comes from the source
The highest sample, in 2020, was 0.34 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.25 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
1 health-based violation since 2016 for the Revised Total Coliform Rule. It began Oct. 20, 2022.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Revised Total Coliform Rule | Coliform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR) | Oct. 20, 2022 | Resolved |
Health-based violations only. 22 monitoring or reporting violations not shown.
Hardness
Moderately hard, 84 mg/L (4.9 grains per gallon), at its one sampling point, 2016 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Riverview Water Works reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic and chromium (total) results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Riverview Water Works’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 6 to Sept. 11, 2023; Alabama’s results run from April 28, 2020 to July 27, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Riverview Water Works’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Riverview Water Works’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Alabama certifies closest to the area Riverview Water Works serves, or a kit by mail
The 3 labs Alabama certifies closest to the area Riverview Water Works serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Future Labs Inc.
Milton, FL · about 38 miles
Eurofins Pensacola
Pensacola, FL · about 43 miles
Mobile Water Service Laboratory
Mobile, AL · about 65 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportRiverview Water Works must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Alabama Department of Environmental Management, Drinking Water Branch, results from Jan. 6, 2020 to Oct. 8, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: ADEM, certified bacteriological, chemical and PFAS drinking water laboratories, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Alabama Department of Environmental Management, Drinking Water Branch, results from July 25, 2016 to July 30, 2025, read Oct. 17, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID AL0000570. Rebuilt from EPA data on Oct. 25, 2026.