Skip to content
TapBuff
ZIP

Freemanville Water System, Inc.

What EPA’s and Alabama’s records show in this utility’s water: PFAS and lithium; nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
3,414 people
Connections
1,138
Water source
Groundwater
Based in
Atmore, AL
County
Escambia
Owner
Local government
Hardness
Soft
The ZIP code it serves

36502

The short answer

1 result is above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 10, 2024 to Oct. 8, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2002 to 2023.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and fluoride: Alabama’s own results, samples taken from Jan. 28, 2020 to Sept. 22, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

EPA’s 2024 PFAS rule, compound by compound

PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 4 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 4 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 4 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 4 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 4 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 4 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.

Above the health goal1

Lead

Comes from pipes, often your own

Above the health goal

3.2ppb

90th percentile, 2021 to 2023

In the latest period, 9 in 10 homes sampled were at or below 3.2 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits3

Nitrate

Comes from the source

Below EPA’s limits

1.5ppm

Highest sample; found in 39 of 39

2026 average: 1.2 ppm

The highest sample, in 2024, was 1.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged 1.2 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 4.9 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

5.5ppb

Highest yearly average, 2020 to 2026

Averaged by year, the highest was 5.5 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 11 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

1.6ppb

Highest yearly average, 2020 to 2026

2026 average: 1.4 ppb

Averaged by year, the highest was 1.6 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 2.7 ppb. In 2026, the latest year on file, its two samples averaged 1.4 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

Alabama utilities above EPA’s PFAS limits
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Hardness

Soft, 6.6 mg/L (0.4 grains per gallon), at its one sampling point, 2016 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 0.4 grains per gallon, salt includedSoftener or salt-free conditioner?Alabama water hardness, utility by utility

Disinfectant

Freemanville Water System, Inc. reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2024 sampling for EPA.

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Chlorine vs. chloramineShower filters, by what their listings cover

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and fluoride results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Freemanville Water System, Inc.’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 10, 2024 to Oct. 8, 2024; Alabama’s results run from Jan. 28, 2020 to Sept. 22, 2026.

Testing your own tap

Freemanville Water System, Inc.’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

The 3 labs Alabama certifies closest to the area Freemanville Water System, Inc. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

Alabama Department of Public Health: Bacteria testing for private wells. Call your county health department to have an environmentalist collect the sample, or collect it yourself in a container from the county health department; there may be a collection fee and a testing fee. Well Water, Alabama Department of Public Health.

All 64 certified labs for Alabama

Sources

PWSID AL0000561. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Nearby

All Alabama utilities

What to do next