Skip to content
TapBuff

Skyway Water & Sewer

EPA’s and Washington’s records have results for 37 contaminants in its water; 5 were found.

Serves 12,036 people · Surface water bought from another system · Seattle, WA · Hardness: moderately hard

Serves
12,036 people
Connections
4,242
Water source
Surface water bought from another system
Based in
Seattle, WA
County
King
Owner
Local government
Hardness
Moderately hard
The ZIP code it serves

98178

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 10, 2023 to Feb. 6, 2024.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, chromium (total) and arsenic: Washington’s own results, samples taken from Feb. 5, 2020 to Aug. 10, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 38.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 16.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 38.3 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 85.3 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 38.7 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 37.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 19.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 37.7 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 61.1 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 32.1 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 1.2 ppm

Highest sample; found in 21 of 21 · 2026 average: 0.27 ppm · Comes from the source

The highest sample, in 2020, was 1.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.8 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.1 ppm

Highest yearly average, 2022 · Forms or is added in treatment

Averaged by year, the highest was 0.1 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.27 ppm, in 2015.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 1.5 ppb

Highest yearly average, 2022 · Comes from the source

Averaged by year, the highest was 1.5 ppb, in 2022, below EPA’s legal limit of 100 ppb. That is the only year on file.

What handles it

About chromium (total)
Washington utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Moderately hard, typically 112 mg/L (6.5 grains per gallon), across 3 sampling points, in 2022.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Skyway Water & Sewer reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported another disinfectant, ozone and ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, chromium (total) and arsenic results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Skyway Water & Sewer’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 10, 2023 to Feb. 6, 2024; Washington’s results run from Feb. 5, 2020 to Aug. 10, 2026.

Testing your own tap

Skyway Water & Sewer’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Skyway Water & Sewer’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Washington certifies closest to the area Skyway Water & Sewer serves, or a kit by mail

The 3 labs Washington certifies closest to the area Skyway Water & Sewer serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • AmTest Laboratories

    Renton, WA · about 2 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts

    (425) 885-1664

  • Analytical Resources, LLC

    Tukwila, WA · about 3 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (206) 695-6200

  • Friedman & Bruya, Inc.

    Seattle, WA · about 4 miles

    Certified for lead and copper, metals

    (800) 487-8231

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5338800. Rebuilt from EPA data on Oct. 25, 2026.