Skip to content
TapBuff
ZIP

Skagit Co Water District #1

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,974 people
Connections
176
Water source
Groundwater
Based in
MT Vernon, WA
County
Skagit
Owner
Local government
Hardness
Moderately hard
The 2 ZIP codes it serves

98237, 98284

The short answer

1 result is above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, nitrate, chromium (total) and fluoride: Washington’s own results, samples taken from Jan. 2, 2020 to Sept. 9, 2025, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Arsenic

Comes from the source

Above the health goal

1.7ppb

Highest yearly average, 2025

Averaged by year, the highest was 1.7 ppb, in 2025: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.0 ppb, in 2016.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

0.64ppm

Highest sample; found in 8 of 8

2025 average: 0.5 ppm

The highest sample, in 2022, was 0.64 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its three samples averaged 0.5 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.74 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Chromium (total)

Comes from the source

Below EPA’s limits

1.2ppb

Highest yearly average, 2025

Averaged by year, the highest was 1.2 ppb, in 2025, below EPA’s legal limit of 100 ppb. That is the only year on file.

What handles it

2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Fluoride
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Moderately hard, 90 mg/L (5.3 grains per gallon), at its one sampling point, in 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 5.3 grains per gallon, salt includedSoftener or salt-free conditioner?Washington water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, chromium (total) and fluoride results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Skagit Co Water District #1’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from Jan. 2, 2020 to Sept. 9, 2025.

Testing your own tap

Skagit Co Water District #1’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Skagit Co Water District #1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eurofins DW and WW West, Washington Laboratory

    Burlington, WA · about 22 miles

    Certified for bacteria, nitrate, minerals and other inorganics, disinfection byproducts

    (360) 757-1400

  • Freshwater Analytical Labs, LLC

    Arlington, WA · about 24 miles

    Certified for bacteria

    (360) 913-7542

  • Exact Scientific Services, Inc.

    Ferndale, WA · about 41 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (360) 733-1205

All 84 certified labs for Washington

Sources

PWSID WA5300392. Rebuilt from EPA data on Oct. 18, 2026.

Also in Skagit County

All Washington utilities

What to do next