Skip to content
TapBuff

Peacock Hill

EPA’s and Washington’s records have results for 37 contaminants in its water; 10 were found.

Serves 7,401 people · Groundwater · Tacoma, WA · Hardness: varies by source

Serves
7,401 people
Connections
2,718
Water source
Groundwater
Based in
Tacoma, WA
County
Pierce
Owner
Private
Hardness
Varies by source
The 2 ZIP codes it serves

98332, 98503

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for arsenic and lead, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 20 to Oct. 15, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM): Washington’s own results, samples taken from Feb. 24, 2020 to Aug. 11, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Five other PFAS with no federal limit were found, the highest PFPeA at 25.6 ppt: see them below.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Below EPA’s limits, 5 results

Arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFHxS, EPA’s 2029 limit 10 pptAt EPA’s limit, as EPA rounds; highest 14.9 ppt

Highest sample, Oct. 15, 2024; found in 2 of 52 · Comes from the source

The highest sample was 14.9 ppt. As EPA rounds results, that is at EPA’s new limit of 10 ppt, which takes effect in 2029, not above it: EPA counts a result as above it from 15 ppt.

How it’s judged

Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 14 ppt, at it as EPA rounds results, not above it.

What handles it

About PFHxS
Nitrate, Legal limit 10 ppm; highest 3.3 ppm

Highest sample; found in 55 of 135 · 2026 average: 0.58 ppm · Comes from the source

The highest sample, in 2020, was 3.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 16 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.0 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.4 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 1.4 ppb · Comes from the source

Averaged by year, the highest was 2.4 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 8.9 ppb. In 2026, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.1 ppb, in 2018.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.3 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.3 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
PFBS, Health benchmark 2,000 ppt; highest 16 ppt

Highest sample, Oct. 15, 2024; found in 2 of 52 · Comes from the source

The highest sample was 16 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 52 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 52 samples, below 4 ppt
PFHxS10 pptAt EPA’s limit, as EPA rounds14.9 ppt highest, found in 2 of 52 samples. Details
PFNA10 pptNot foundNot found in any of 52 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 52 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits16 ppt highest, found in 2 of 52 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits1.41 at its highest sampling location, AAB107 (Salal Ridge #1). EPA compares it at one significant digit, so it rounds to 1, at the limit, not above it
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Washington utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA25.6 ppt2 of 52None covers it
PFHxA18.8 ppt2 of 52None covers it
PFPeS8.1 ppt2 of 52None covers it
PFBA6.3 ppt2 of 52None covers it
PFHpA3.5 ppt2 of 52NSF/ANSI 53: Total PFAS Reduction
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Total trihalomethanes (TTHM)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Soft to moderately hard depending on the source, 38 to 103 mg/L (2.2 to 6 grains per gallon), across 23 sampling points, 2020 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Peacock Hill reported chlorine, not chloramine, at 3 of its 26 sampling points, and no disinfectant at 23, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Peacock Hill’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 20 to Oct. 15, 2024; Washington’s results run from Feb. 24, 2020 to Aug. 11, 2026.

Testing your own tap

Peacock Hill’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Peacock Hill’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 2.3 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Washington certifies closest to the area Peacock Hill serves, or a kit by mail

The 3 labs Washington certifies closest to the area Peacock Hill serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Thurston County Health Department Laboratory

    Olympia, WA · about 10 miles

    Certified for bacteria, nitrate

    (360) 867-2631

  • Water Management Laboratories, Inc.

    Tacoma, WA · about 13 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (253) 531-3121

  • Olympic Analytical LLC dba Vanguard Laboratory

    Olympia, WA · about 17 miles

    Certified for bacteria, nitrate

    (360) 967-7010

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5366637. Rebuilt from EPA data on Oct. 25, 2026.