Skip to content
TapBuff
ZIP

Newberry Hill

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,143 people
Connections
81
Water source
Groundwater
Based in
Poulsbo, WA
County
Kitsap
Owner
Local government
Hardness
Soft
The 2 ZIP codes it serves

98312, 98383

The short answer

1 result is above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Total trihalomethanes (TTHM), arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and nitrate: Washington’s own results, samples taken from Aug. 31, 2020 to June 24, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from Sept. 4, 2018 to Sept. 4, 2018. Newer results are in the utility’s annual water quality report.

Above the health goal1

Lead

Comes from pipes, often your own

Above the health goal

1.0ppb

90th percentile, 2023 to 2025

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits1

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

0.48ppb

Highest yearly average, 2020 to 2025

2025, one sample: 0.25 ppb

Averaged by year, the highest was 0.48 ppb, in 2024, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, its one sample was 0.25 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 2.6 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
6 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Nitrate
  • Uranium

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Hardness

Soft, 48 mg/L (2.8 grains per gallon), at its one sampling point, in 2021.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 2.8 grains per gallon, salt includedSoftener or salt-free conditioner?Washington water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and nitrate results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Newberry Hill’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from Aug. 31, 2020 to June 24, 2026; EPA’s compliance samples are from Sept. 4, 2018 to Sept. 4, 2018.

Testing your own tap

Newberry Hill’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Newberry Hill serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Spectra Laboratories - Kitsap, LLC

    Poulsbo, WA · about 11 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (360) 779-5141

  • Eurofins EPK Built Environment Testing, LLC

    Seattle, WA · about 18 miles

    Certified for bacteria, asbestos

    (206) 781-0155

  • MCL Food Testing

    Seattle, WA · about 19 miles

    Certified for bacteria

    (206) 633-3637

All 84 certified labs for Washington

Sources

PWSID WA5306136. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Kitsap County

All Washington utilities

What to do next