Skip to content
TapBuff

Marlin Hutterian

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
134 people
Connections
41
Water source
Groundwater
Based in
Marlin, WA
County
Grant
Owner
Private
Hardness
Soft
The ZIP code it serves

98832

The short answer

1 result is above the health goal. The worst: Nitrate, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Nitrate, fluoride, arsenic and chromium (total): Washington’s own results, samples taken from Jan. 6, 2020 to Dec. 23, 2025, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Nitrate

Comes from the source

Above the health goal

16.3ppm

Highest sample; found in 3 of 9

2025: not found

From 2021 to 2023, two samples were above EPA’s legal limit of 10 ppm, the highest 16.3 ppm in 2021. Two have no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. In 2025, the latest year on file, it wasn’t found in its one sample. EPA recorded no violation for nitrate at this utility since 2020. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.46 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Below EPA’s limits1

Fluoride

Forms or is added in treatment

Below EPA’s limits

1.2ppm

Highest yearly average, 2021

Averaged by year, the highest was 1.2 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.15 ppm, in 2018.

What handles it

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Nitrate/Nitrite (30 ppm challenge)

    For: Nitrate

  • NSF/ANSI 58

    Claim: Nitrate/Nitrite Reduction

    For: Nitrate

    Other certifiers’ wording: Nitrate

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Soft, 40 mg/L (2.3 grains per gallon), at its one sampling point, in 2021.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 32 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, arsenic and chromium (total) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Marlin Hutterian’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from Jan. 6, 2020 to Dec. 23, 2025.

Testing your own tap

Marlin Hutterian’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Marlin Hutterian serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Soiltest Farm Consultants, Inc. Laboratory

    Moses Lake, WA · about 20 miles

    Certified for nitrate, minerals and other inorganics

    (509) 765-1622

  • AV Labs, Inc

    Othello, WA · about 39 miles

    Certified for bacteria

    (509) 488-2468

  • Lincoln County Environmental Health Lab

    Davenport, WA · about 44 miles

    Certified for bacteria

    (509) 215-1034

All 84 certified labs for Washington

Sources

PWSID WA53AA503. Rebuilt from EPA data on Oct. 18, 2026.