Skip to content
TapBuff

Kent Water Department

EPA’s and Washington’s records have results for 37 contaminants in its water; 7 were found.

Serves 166,421 people · Surface water bought from another system · Kent, WA · Hardness: varies by source

Serves
166,421 people
Connections
35,962
Water source
Surface water bought from another system
Based in
Kent, WA
County
King
Owner
Local government
Hardness
Varies by source
The 4 ZIP codes it serves

98030, 98031, 98032, 98092

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for arsenic, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 27 to Dec. 4, 2025.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 3.4 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.

Fluoride, arsenic, total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5) and chromium (total): Washington’s own results, samples taken from March 3, 2020 to Sept. 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.

Below EPA’s limits, 7 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.72 ppm

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.64 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.72 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.82 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.78 ppm, in 2017.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.6 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 1.6 ppb, in 2026, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.9 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.33 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 12.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 10.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 12.3 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 33.7 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 13.1 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 1.4 ppm

Highest sample; found in 40 of 47 · 2026 average: 0.64 ppm · Comes from the source

The highest sample, in 2022, was 1.4 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its seven samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.5 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 5.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.3 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 12.3 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.4 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 0.32 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.32 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.1 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 3.5 ppt

Highest sample, Oct. 21, 2025; found in 2 of 14 · Comes from the source

The highest sample was 3.5 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 14 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 14 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 14 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 14 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.5 ppt highest, found in 2 of 14 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Washington utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Soft to moderately hard depending on the source, 16 to 120 mg/L (0.9 to 7 grains per gallon), across 8 sampling points, 2020 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Kent Water Department reported disinfecting with chlorine, not chloramine, at all 6 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Fluoride, arsenic, total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5) and chromium (total) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Kent Water Department’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 27 to Dec. 4, 2025; Washington’s results run from March 3, 2020 to Sept. 1, 2026.

Testing your own tap

Kent Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Kent Water Department’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Washington certifies closest to the area Kent Water Department serves, or a kit by mail

The 3 labs Washington certifies closest to the area Kent Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • AmTest Laboratories

    Renton, WA · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts

    (425) 885-1664

  • Analytical Resources, LLC

    Tukwila, WA · about 10 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (206) 695-6200

  • Aqua Test, Incorporated

    Maple Valley, WA · about 12 miles

    Certified for bacteria, nitrate

    (425) 432-9360

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5338150. Rebuilt from EPA data on Oct. 25, 2026.