Skip to content
TapBuff

Discovery Bay Leaseholders

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
123 people
Connections
118
Water source
Groundwater
Based in
Sequim, WA
County
Jefferson
Owner
Private
Hardness
Moderately hard
The ZIP code it serves

98382

The short answer

1 result is above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, chromium (total), fluoride and nitrate: Washington’s own results, samples taken from Oct. 5, 2020 to Oct. 13, 2025.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from July 25, 2012 to July 18, 2017. Newer results are in the utility’s annual water quality report.

Above the health goal1

Arsenic

Comes from the source

Above the health goal

1.7ppb

Highest yearly average, 2021 to 2022

Averaged by year, the highest was 1.7 ppb, in 2022: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That was also the latest year on file.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits2

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

37.2ppb

Highest yearly average, 2012 to 2014

Averaged by year, the highest was 37.2 ppb, in 2014, below EPA’s legal limit of 80 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

4.5ppb

Highest yearly average, 2012 to 2017

2017: not found

Averaged by year, the highest was 4.5 ppb, in 2012, below EPA’s legal limit of 60 ppb. In 2017, the latest year on file, it wasn’t found in its one sample.

What handles it

No certification claim covers this compound yet.

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Fluoride
  • Lead
  • Nitrate

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Moderately hard, 64 mg/L (3.7 grains per gallon), at its one sampling point, in 2022.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, chromium (total), fluoride and nitrate results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019. Discovery Bay Leaseholders’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from Oct. 5, 2020 to Oct. 13, 2025; EPA’s compliance samples are from July 25, 2012 to July 18, 2017.

Testing your own tap

Discovery Bay Leaseholders’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Discovery Bay Leaseholders serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Clallam County Environmental Laboratory

    Port Angeles, WA · about 14 miles

    Certified for bacteria, nitrate

    (360) 417-2334

  • Spectra Laboratories - Kitsap, LLC

    Poulsbo, WA · about 29 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (360) 779-5141

  • Eurofins EPK Built Environment Testing, LLC

    Seattle, WA · about 41 miles

    Certified for bacteria, asbestos

    (206) 781-0155

All 84 certified labs for Washington

Sources

PWSID WA5314071. Rebuilt from EPA data on Oct. 18, 2026.