Skip to content
TapBuff

Dayton Water Department

EPA’s and Washington’s records have results for 7 contaminants in its water; 4 were found.

Serves 3,374 people · Groundwater · Dayton, WA · Hardness: moderately hard

Serves
3,374 people
Connections
1,483
Water source
Groundwater
Based in
Dayton, WA
County
Columbia
Owner
Local government
Hardness
Moderately hard
The ZIP code it serves

99328

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Nitrate, fluoride, total trihalomethanes (TTHM), chromium (total), arsenic and haloacetic acids (HAA5): Washington’s own results, samples taken from March 30, 2020 to June 16, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 3.9 ppm

Highest sample; found in 20 of 20 · 2026 average: 2.1 ppm · Comes from the source

The highest sample, in 2021, was 3.9 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.9 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.26 ppm

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.26 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.27 ppm. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.27 ppm, in 2016.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.56 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 0.56 ppb, in 2020, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.6 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 0.54 ppb

Highest yearly average, 2025 · Comes from the source

Averaged by year, the highest was 0.54 ppb, in 2025, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.1 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppb, in 2016.

What handles it

About chromium (total)
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Haloacetic acids (HAA5)
  • Lead

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Moderately hard, typically 94 mg/L (5.5 grains per gallon), across 3 sampling points, 2020 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, total trihalomethanes (TTHM), chromium (total), arsenic and haloacetic acids (HAA5) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Dayton Water Department’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from March 30, 2020 to June 16, 2026.

Testing your own tap

Dayton Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Dayton Water Department’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Washington certifies closest to the area Dayton Water Department serves, or a kit by mail

The 3 labs Washington certifies closest to the area Dayton Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Walla Walla Regional Water Testing Services

    College Place, WA · about 29 miles

    Certified for bacteria, nitrate

    (509) 526-9287

  • Matrix Sciences International Inc. dba KTL

    Pasco, WA · about 52 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (509) 547-3838

  • RJ Lee Group, Inc. Columbia Basin Analytical Laboratories

    Pasco, WA · about 52 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (509) 792-1951

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5318250. Rebuilt from EPA data on Oct. 25, 2026.