Skip to content
TapBuff

Corbett Creek

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
95 people
Connections
45
Water source
Groundwater
Based in
Port Orchard, WA
County
Stevens
Owner
Private
Hardness
Soft
The ZIP code it serves

99114

The short answer

Nothing in EPA’s and Washington’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 6 health-based violations since 2016.

What was found

Nitrate, total trihalomethanes (TTHM), arsenic, chromium (total), fluoride and haloacetic acids (HAA5): Washington’s own results, samples taken from May 14, 2020 to July 28, 2026, with EPA’s 2012 to 2019 file for earlier years.

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

0.2ppm

Highest sample; found in 6 of 8

2026: not found

The highest sample, in 2020, was 0.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 1.1 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

0.38ppb

Highest yearly average, 2020 to 2026

2026: not found

Averaged by year, the highest was 0.38 ppb, in 2020, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Lead

Hardness

Soft, 47 mg/L (2.7 grains per gallon), at its one sampling point, in 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Groundwater RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)May 1, 2023 to May 31, 2023—Resolved
Groundwater RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)April 1, 2023 to April 30, 2023—Resolved
Groundwater RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Dec. 1, 2020 to Dec. 31, 2020—Resolved
Groundwater RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Feb. 1, 2020 to Feb. 29, 2020—Resolved
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)July 1, 2018 to July 31, 2018—Resolved
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)Aug. 1, 2017 to Aug. 31, 2017—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 43 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), arsenic, chromium (total), fluoride and haloacetic acids (HAA5) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Corbett Creek’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from May 14, 2020 to July 28, 2026.

Testing your own tap

Corbett Creek’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Corbett Creek serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Lincoln County Environmental Health Lab

    Davenport, WA · about 70 miles

    Certified for bacteria

    (509) 215-1034

  • Anatek Labs, Inc - Spokane

    Spokane, WA · about 71 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (509) 838-3999

  • Tshimakain Creek Laboratories

    Spokane Valley, WA · about 71 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (509) 928-3577

All 84 certified labs for Washington

Sources

PWSID WA5329790. Rebuilt from EPA data on Oct. 18, 2026.