Skip to content
TapBuff

City of Winlock

EPA’s and Washington’s records have results for 7 contaminants in its water; 2 were found.

Serves 3,502 people · Groundwater · Winlock, WA · Hardness: soft

Serves
3,502 people
Connections
1,040
Water source
Groundwater
Based in
Winlock, WA
County
Lewis
Owner
Local government
Hardness
Soft
The ZIP code it serves

98596

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2006 to 2023.

Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM): Washington’s own results, samples taken from Sept. 3, 2020 to April 2, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 2 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Nitrate, Legal limit 10 ppm; highest 3.9 ppm

Highest sample; found in 29 of 29 · 2026 average: 2.5 ppm · Comes from the source

The highest sample, in 2026, was 3.9 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.5 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.4 ppb

90th percentile, 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Total trihalomethanes (TTHM)

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Hardness

Soft, typically 45 mg/L (2.6 grains per gallon), across 4 sampling points, 2024 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Winlock’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from Sept. 3, 2020 to April 2, 2026.

Testing your own tap

City of Winlock’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Winlock’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 2.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Washington certifies closest to the area City of Winlock serves, or a kit by mail

The 3 labs Washington certifies closest to the area City of Winlock serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Lewis County Environmental Health Laboratory

    Chehalis, WA · about 10 miles

    Certified for bacteria, nitrate

    (360) 740-1237

  • ALS Environmental - Kelso

    Kelso, WA · about 24 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (360) 577-7222

  • Olympic Analytical LLC dba Vanguard Laboratory

    Olympia, WA · about 41 miles

    Certified for bacteria, nitrate

    (360) 967-7010

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5397500. Rebuilt from EPA data on Oct. 25, 2026.