Skip to content
TapBuff

City of Kennewick

EPA’s and Washington’s records have results for 37 contaminants in its water; 13 were found.

Serves 118,164 people · Surface water · Kennewick, WA · Hardness: varies by source

Serves
118,164 people
Connections
39,118
Water source
Surface water
Based in
Kennewick, WA
County
Benton
Owner
Local government
Hardness
Varies by source
The 3 ZIP codes it serves

99336, 99337, 99338

The short answer

None of the results here is above a limit in force today. PFOS is above EPA’s new limit, which takes effect in 2029. PFOA had a sample above it, but not on average, the way EPA will judge it. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 6, 2023 to Jan. 3, 2024.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.4 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.

Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), fluoride and chromium (total): Washington’s own results, samples taken from Feb. 4, 2020 to Aug. 4, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFPeA at 7.5 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOS

Comes from the source

Above EPA’s new limit (2029)

11.5 ppt

Highest sample, Jan. 3, 2024; found in 4 of 8

The highest sample was 11.5 ppt, about 2.9 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 10.0 ppt, also above it.

What handles it

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

4.6 ppt

Highest sample, Aug. 7, 2023; found in 2 of 8

The highest sample was 4.6 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.2 ppt, below it.

What handles it

Below EPA’s limits, 9 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFHxS, EPA’s 2029 limit 10 pptAt EPA’s limit, as EPA rounds; highest 10.6 ppt

Highest sample, Jan. 3, 2024; found in 4 of 8 · Comes from the source

The highest sample was 10.6 ppt. As EPA rounds results, that is at EPA’s new limit of 10 ppt, which takes effect in 2029, not above it: EPA counts a result as above it from 15 ppt.

How it’s judged

Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 10.1 ppt, at it as EPA rounds results, not above it.

What handles it

About PFHxS
Lithium, Health reference level 10 ppb; highest 9.4 ppb

Highest sample, Nov. 7, 2023; found in 1 of 8 · Comes from the source

The highest sample was 9.4 ppb, below EPA’s health reference level of 10 ppb. Lithium has no legal limit or health goal of its own.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Nitrate, Legal limit 10 ppm; highest 5.5 ppm

Highest sample; found in 20 of 27 · 2026 average: 3.1 ppm · Comes from the source

The highest sample, in 2025, was 5.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 5.5 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 39.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 33.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 39.6 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 87.7 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 39 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.0 ppb

Highest yearly average, 2021 to 2025 · 2025 average: 1.1 ppb · Comes from the source

Averaged by year, the highest was 3.0 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 3.4 ppb. In 2025, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.9 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 12.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 8.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 12.3 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 32.6 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.1 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.29 ppm

Highest yearly average, 2021 to 2022 · 2022 average: 0.13 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.29 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. In 2022, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.19 ppm, in 2014.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 0.38 ppb

Highest yearly average, 2022 · Comes from the source

Averaged by year, the highest was 0.38 ppb, in 2022, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.1 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.66 ppb, in 2014.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 6.4 ppt

Highest sample, Jan. 3, 2024; found in 4 of 8 · Comes from the source

The highest sample was 6.4 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit4.6 ppt highest, found in 2 of 8 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)11.5 ppt highest, found in 4 of 8 samples. Details
PFHxS10 pptAt EPA’s limit, as EPA rounds10.6 ppt highest, found in 4 of 8 samples. Details
PFNA10 pptNot foundNot found in any of 8 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 8 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits6.4 ppt highest, found in 4 of 8 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits1.01 at its highest sampling location, RC 4 & 5 Combined Finished Water Tap. EPA compares it at one significant digit, so it rounds to 1, at the limit, not above it
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Washington utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA7.5 ppt4 of 8None covers it
PFHxA6.5 ppt4 of 8None covers it
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Moderately hard to very hard depending on the source, 64 to 212 mg/L (3.7 to 12.4 grains per gallon), across 4 sampling points, 2021 to 2022.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Kennewick reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported permanganate and ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 5 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), fluoride and chromium (total) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Kennewick’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 6, 2023 to Jan. 3, 2024; Washington’s results run from Feb. 4, 2020 to Aug. 4, 2026.

Testing your own tap

City of Kennewick’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Kennewick’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Kennewick’s results flag: PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Washington certifies closest to the area City of Kennewick serves, or a kit by mail

The 3 labs Washington certifies closest to the area City of Kennewick serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Benton-Franklin Health District Lab

    Kennewick, WA · about 5 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (509) 460-4206

  • Energy NW Environmental (PPL) Lab

    Richland, WA · about 9 miles

    Certified for bacteria

    (509) 372-5429

  • Energy Northwest Environmental Services Lab

    Richland, WA · about 14 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (509) 377-8058

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5338100. Rebuilt from EPA data on Oct. 25, 2026.