Skip to content
TapBuff

City of Kahlotus

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
262 people
Connections
102
Water source
Groundwater
Based in
Kahlotus, WA
County
Franklin
Owner
Local government
Hardness
Very hard
The ZIP code it serves

99335

The short answer

1 result is above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, nitrate and chromium (total): Washington’s own results, samples taken from July 15, 2020 to Dec. 31, 2025, with EPA’s 2012 to 2019 file for earlier years.

Fluoride: EPA’s compliance monitoring file, samples taken from July 27, 2016 to July 10, 2019. Newer results are in the utility’s annual water quality report.

Above the health goal1

Arsenic

Comes from the source

Above the health goal

2.6ppb

Highest yearly average, 2025

Averaged by year, the highest was 2.6 ppb, in 2025: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 2.0 ppb, in 2016.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

6.4ppm

Highest sample; found in 8 of 8

2025 average: 4.2 ppm

The highest sample, in 2024, was 6.4 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its four samples averaged 4.2 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 4.5 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.5ppm

Highest yearly average, 2016 to 2019

2019, one sample: 0.37 ppm

Averaged by year, the highest was 0.5 ppm, in 2016, below EPA’s legal limit of 4.0 ppm. In 2019, the latest year on file, its one sample was 0.37 ppm.

What handles it

2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Very hard, 321 mg/L (18.8 grains per gallon), at its one sampling point, in 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 55 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, nitrate and chromium (total) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride comes from EPA’s file alone, which ends in 2019. City of Kahlotus’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from July 15, 2020 to Dec. 31, 2025; EPA’s compliance samples are from July 27, 2016 to July 10, 2019.

Testing your own tap

City of Kahlotus’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area City of Kahlotus serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Matrix Sciences International Inc. dba KTL

    Pasco, WA · about 31 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (509) 547-3838

  • RJ Lee Group, Inc. Columbia Basin Analytical Laboratories

    Pasco, WA · about 31 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (509) 792-1951

  • AV Labs, Inc

    Othello, WA · about 37 miles

    Certified for bacteria

    (509) 488-2468

All 84 certified labs for Washington

Sources

PWSID WA5337400. Rebuilt from EPA data on Oct. 18, 2026.