Skip to content
TapBuff
ZIP

Chiwawa Communities Assn

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
352 people
Connections
333
Water source
Groundwater
Based in
Leavenworth, WA
County
Chelan
Owner
Private
Hardness
Moderately hard
The ZIP code it serves

98826

The short answer

1 result is above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2009 to 2023.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 3.0 ppm, for the period ending Dec. 31, 2009. None since is on file, so it is not counted as a current finding.

Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM): Washington’s own results, samples taken from July 7, 2020 to Aug. 4, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Lead

Comes from pipes, often your own

Above the health goal

0.7ppb

90th percentile, 2021 to 2023

In the latest period, 9 in 10 homes sampled were at or below 0.7 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits1

Nitrate

Comes from the source

Below EPA’s limits

1.3ppm

Highest sample; found in 13 of 25

2026 average: 0.45 ppm

The highest sample, in 2021, was 1.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged 0.45 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.85 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Hardness

Moderately hard, typically 107 mg/L (6.3 grains per gallon), across 2 sampling points, 2024 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 6.3 grains per gallon, salt includedSoftener or salt-free conditioner?Washington water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Chiwawa Communities Assn’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from July 7, 2020 to Aug. 4, 2026.

Testing your own tap

Chiwawa Communities Assn’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Chiwawa Communities Assn serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Anatek Labs, Inc - Wenatchee

    Wenatchee, WA · about 34 miles

    Certified for bacteria

    (509) 701-8362

  • Aqua Test, Incorporated

    Maple Valley, WA · about 58 miles

    Certified for bacteria, nitrate

    (425) 432-9360

  • Freshwater Analytical Labs, LLC

    Arlington, WA · about 59 miles

    Certified for bacteria

    (360) 913-7542

All 84 certified labs for Washington

Sources

PWSID WA5312850. Rebuilt from EPA data on Oct. 18, 2026.

Also in Chelan County

All Washington utilities

What to do next