Skip to content
TapBuff
ZIP

Boots & Saddles 662

What EPA’s and Washington’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
150 people
Connections
39
Water source
Groundwater
Based in
Lacey, WA
County
Pierce
Owner
Local government
Hardness
Soft
The ZIP code it serves

98328

The short answer

2 results are above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2026.

Arsenic, chromium (total), fluoride and nitrate: Washington’s own results, samples taken from Sept. 8, 2020 to Sept. 8, 2026.

Haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from Sept. 25, 2017 to Sept. 25, 2017. Newer results are in the utility’s annual water quality report.

Above the health goal2

Lead

Comes from pipes, often your own

Above the health goal

4.8ppb

90th percentile, 2026

In the latest period, 9 in 10 homes sampled were at or below 4.8 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Arsenic

Comes from the source

Above the health goal

2.9ppb

Highest yearly average, 2020

Averaged by year, the highest was 2.9 ppb, in 2020: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That is the only year on file.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Nitrate

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

The best reverse osmosis systems, ranked

Hardness

Soft, 56 mg/L (3.3 grains per gallon), at its one sampling point, in 2020.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 3.3 grains per gallon, salt includedSoftener or salt-free conditioner?Washington water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, chromium (total), fluoride and nitrate results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Haloacetic acids (HAA5) comes from EPA’s file alone, which ends in 2019. Boots & Saddles 662’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Washington’s results run from Sept. 8, 2020 to Sept. 8, 2026; EPA’s compliance samples are from Sept. 25, 2017 to Sept. 25, 2017.

Testing your own tap

Boots & Saddles 662’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

The 3 labs Washington certifies closest to the area Boots & Saddles 662 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Water Management Laboratories, Inc.

    Tacoma, WA · about 27 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (253) 531-3121

  • Thurston County Health Department Laboratory

    Olympia, WA · about 38 miles

    Certified for bacteria, nitrate

    (360) 867-2631

  • Aqua Test, Incorporated

    Maple Valley, WA · about 39 miles

    Certified for bacteria, nitrate

    (425) 432-9360

All 84 certified labs for Washington

Sources

PWSID WA5307730. Rebuilt from EPA data on Oct. 18, 2026.

Also in Pierce County

All Washington utilities

What to do next