Skip to content
TapBuff

Taylor - West Weber Wid

EPA’s and Utah’s records have results for 37 contaminants in its water; 4 were found.

Serves 9,900 people · Surface water bought from another system · Ogden, UT · Hardness: hard

Serves
9,900 people
Connections
3,371
Water source
Surface water bought from another system
Based in
Ogden, UT
County
Weber
Owner
Local government
Hardness
Hard
The 3 ZIP codes it serves

84315, 84401, 84404

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 23 to Oct. 22, 2024.

Fluoride, arsenic, chromium (total) and nitrate: Utah’s own results, samples taken from Sept. 2, 2020 to Aug. 25, 2026, with EPA’s 2012 to 2019 file for earlier years.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from Oct. 10, 2012 to July 30, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

110 ppb

Highest sample, Jan. 23, 2024; found in 9 of 10

The highest sample was 110 ppb, about 11 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 40.4 ppb

Highest yearly average, 2012 to 2019 · Forms or is added in treatment

Averaged by year, the highest was 40.4 ppb, in 2019, below EPA’s legal limit of 80 ppb. Its highest single sample was 42.4 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 10.4 ppb

Highest yearly average, 2012 to 2019 · Forms or is added in treatment

Averaged by year, the highest was 10.4 ppb, in 2019, below EPA’s legal limit of 60 ppb. Its highest single sample was 17.1 ppb. That was also the latest year on file.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.2 ppm

Highest yearly average, 2022 to 2025 · 2025: not found · Forms or is added in treatment

Averaged by year, the highest was 0.2 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.2 ppm, in 2012.

What handles it

About fluoride
Utilities above EPA’s PFAS limits, state by state⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 38 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Hard, typically 145 mg/L (8.5 grains per gallon), across 2 sampling points, in 2016.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Taylor - West Weber Wid reported chloramine at 1 of its 4 sampling points and chlorine without chloramine at 0, and no disinfectant at 3, in its 2024 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported ozone and ultraviolet light.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Fluoride, arsenic, chromium (total) and nitrate results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019. Taylor - West Weber Wid’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 23 to Oct. 22, 2024; Utah’s results run from Sept. 2, 2020 to Aug. 25, 2026; EPA’s compliance samples are from Oct. 10, 2012 to July 30, 2019.

Testing your own tap

Taylor - West Weber Wid’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Taylor - West Weber Wid’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Taylor - West Weber Wid’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Utah certifies closest to the area Taylor - West Weber Wid serves, or a kit by mail

The 3 labs Utah certifies closest to the area Taylor - West Weber Wid serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • RJ Analytical LLC

    Pleasant View, UT · about 8 miles

    Certified for bacteria

    (801) 807-8248

  • Davis County Environmental Health Laboratory

    Clearfield, UT · about 8 miles

    Certified for bacteria, minerals and other inorganics

    (801) 525-5115

  • North Davis Sewer District Laboratory

    Syracuse, UT · about 9 miles

    Certified for bacteria

    (801) 825-0712

All 60 certified labs for Utah⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Utah certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Utah’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID UTAH29019. Rebuilt from EPA data on Oct. 25, 2026.