Skip to content
TapBuff

Pleasant View Culinary Water

EPA’s and Utah’s records have results for 37 contaminants in its water; 4 were found.

Serves 9,250 people · Groundwater · Pleasant View, UT

Serves
9,250 people
Connections
2,503
Water source
Groundwater
Based in
Pleasant View, UT
County
Weber
Owner
Local government
The ZIP code it serves

84414

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 2 health-based violations since 2016, both resolved in EPA’s file.

Filters for lead, if you want it lower⁠The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 23 to Oct. 21, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2010 to 2023.

Nitrate, fluoride, arsenic and chromium (total): Utah’s own results, samples taken from July 8, 2020 to July 8, 2026, with EPA’s 2012 to 2019 file for earlier years.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from July 23, 2013 to Aug. 7, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Nitrate, Legal limit 10 ppm; highest 5.1 ppm

Highest sample; found in 45 of 47 · 2026 average: 0.86 ppm · Comes from the source

The highest sample, in 2023, was 5.1 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.3 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.7 ppb

90th percentile, 2021 to 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.7 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 8.8 ppb

Highest yearly average, 2013 to 2019 · Forms or is added in treatment

Averaged by year, the highest was 8.8 ppb, in 2019, below EPA’s legal limit of 80 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.17 ppm

Highest yearly average, 2022 to 2025 · 2025 average: 0.075 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.17 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.34 ppm. In 2025, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.25 ppm, in 2016.

What handles it

About fluoride
Utilities above EPA’s PFAS limits, state by state⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, 1 for the Revised Total Coliform Rule and 1 for the Groundwater Rule. The latest began Feb. 7, 2020.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Feb. 7, 2020Resolved
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyMarch 17, 2017Resolved

Health-based violations only. 61 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Pleasant View Culinary Water reported chlorine, not chloramine, at 1 of its 3 sampling points, and no disinfectant at 2, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, arsenic and chromium (total) results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019. Pleasant View Culinary Water’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 23 to Oct. 21, 2024; Utah’s results run from July 8, 2020 to July 8, 2026; EPA’s compliance samples are from July 23, 2013 to Aug. 7, 2019.

Testing your own tap

Pleasant View Culinary Water’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Pleasant View Culinary Water’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 1.7 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Utah certifies closest to the area Pleasant View Culinary Water serves, or a kit by mail

The 3 labs Utah certifies closest to the area Pleasant View Culinary Water serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • RJ Analytical LLC

    Pleasant View, UT · about 2 miles

    Certified for bacteria

    (801) 807-8248

  • Northrup Grumman Space Systems Environmental Laboratory

    Corinne, UT · about 7 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (801) 863-8117

  • Brigham City Laboratory

    Brigham City, UT · about 14 miles

    Certified for bacteria, minerals and other inorganics

    (435) 226-1443

All 60 certified labs for Utah⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Utah certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Utah’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID UTAH29014. Rebuilt from EPA data on Oct. 25, 2026.