Hildale - Colorado City
EPA’s and Utah’s records have results for 38 contaminants in its water; 14 were found.
Serves 6,100 people · Groundwater · Hildale, UT · Hardness: very hard
- Serves
- 6,100 people
- Connections
- 1,214
- Water source
- Groundwater
- Based in
- Hildale, UT
- County
- Washington
- Owner
- Local government
- Hardness
- Very hard
The short answer
None of the results here is above a limit in force today. PFOS and PFHxS are above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from March 15, 2023 to March 27, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 2003 to 2023.
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.9 ppm, for the period ending Dec. 31, 1993. None since is on file, so it is not counted as a current finding.
Uranium, arsenic, fluoride, nitrate and chromium (total): Utah’s own results, samples taken from July 27, 2020 to July 20, 2026, with EPA’s 2012 to 2019 file for earlier years.
Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from July 24, 2013 to Aug. 22, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: PFOS, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFPeS at 13 ppt: see them below.
Above EPA’s new limit, which takes effect in 2029, 2 results
PFOS
Comes from the source
26 ppt
Highest sample, March 15, 2023; found in 1 of 4
The highest sample was 26 ppt, about 6.5 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 13 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
PFHxS
Comes from the source
22 ppt
Highest sample, March 15, 2023; found in 2 of 4
The highest sample was 22 ppt, about twice EPA’s new limit of 10 ppt, which takes effect in 2029. EPA’s health goal is 10 ppt.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 15.8 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
71 ppb
Highest sample, March 15, 2023; found in 2 of 4
The highest sample was 71 ppb, about 7.1 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 8 results
Uranium, arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 53.3 ppb
Highest yearly average, 2013 to 2019 · Forms or is added in treatment
Averaged by year, the highest was 53.3 ppb, in 2019, below EPA’s legal limit of 80 ppb. Its highest single sample was 55.8 ppb. That was also the latest year on file.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 7.3 ppb
Highest yearly average, 2024 to 2026 · 2026 average: 2.3 ppb · Comes from the source
Averaged by year, the highest was 7.3 ppb, in 2024, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 12.2 ppb. In 2026, the latest year on file, its five samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Uranium”
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.4 ppb
Highest yearly average, 2022 to 2025 · 2025 average: 1.3 ppb · Comes from the source
Averaged by year, the highest was 2.4 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.6 ppb. In 2025, the latest year on file, its three samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 9.4 ppb, in 2018.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 11.3 ppb
Highest yearly average, 2013 to 2019 · 2019, one sample: 11.2 ppb · Forms or is added in treatment
Averaged by year, the highest was 11.3 ppb, in 2018, below EPA’s legal limit of 60 ppb. In 2019, the latest year on file, its one sample was below the limit.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.39 ppm
Highest yearly average, 2022 to 2025 · 2025 average: 0.19 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.39 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.54 ppm. In 2025, the latest year on file, its three samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.5 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb
90th percentile, 2021 to 2023 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Nitrate, Legal limit 10 ppm; highest 0.65 ppm
Highest sample; found in 11 of 17 · 2026 average: 0.23 ppm · Comes from the source
The highest sample, in 2024, was 0.65 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.8 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
PFBS, Health benchmark 2,000 ppt; highest 17 ppt
Highest sample, March 15, 2023; found in 2 of 4 · Comes from the source
The highest sample was 17 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Not foundNot found in any of 4 samples, below 4 ppt |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)26 ppt highest, found in 1 of 4 samples. Details |
| PFHxS | 10 ppt | Above EPA’s new limit (2029)22 ppt highest, found in 2 of 4 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 4 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 4 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits17 ppt highest, found in 2 of 4 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Above EPA’s new limit (2029)1.59 at its highest sampling location, HILDALE - COLORADO CITY |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFPeS | 13 ppt | 2 of 4 | None covers it |
| PFHxA | 12 ppt | 2 of 4 | None covers it |
| PFPeA | 4.3 ppt | 1 of 4 | None covers it |
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Chromium (total)
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claims: PFOS Reduction, Total PFAS Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction
For: PFOS, PFHxS, Arsenic, Lead
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Perfluorohexane Sulfonic Acid (PFHxS); Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Perfluorooctane Sulfonate (PFOS), Uranium, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction
For: PFOS, Uranium, Arsenic, Lead
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink carbon
Five years: $1,090, household of 3, cartridges included
Certified for: PFOS, PFHxS
Ninja HydraSense Countertop Water Filtration System (WF1001)
Countertop
Five years: $2,050, household of 3, cartridges included
Certified for: PFOS, PFHxS; also lead, found below its limits
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: PFOS, PFHxS; also lead, found below its limits
2 more filters
Culligan MaxClear Scout Gravity Water Filter (MCS701P)
Dispenser
Five years: $8,840, household of 3, cartridges included
Certified for: PFOS, PFHxS; also lead, found below its limits
Every filter for these, those that cover both first
The best water filters for PFAS, ranked
Hardness
Very hard, typically 250 mg/L (14.6 grains per gallon), across 3 sampling points, 2023 to 2024.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Hildale - Colorado City reported chlorine, not chloramine, at 1 of its 2 sampling points, and no disinfectant at 1, in its 2023 to 2024 sampling for EPA. It also reported permanganate.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
1 health-based violation since 2016 for the Revised Total Coliform Rule. It began Aug. 20, 2017.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Revised Total Coliform Rule | Coliform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR) | Aug. 20, 2017 | Resolved |
Health-based violations only. 217 monitoring or reporting violations not shown.
What this report can’t tell you
Everything else. Uranium, arsenic, fluoride, nitrate and chromium (total) results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019. Hildale - Colorado City’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 15, 2023 to March 27, 2024; Utah’s results run from July 27, 2020 to July 20, 2026; EPA’s compliance samples are from July 24, 2013 to Aug. 22, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Hildale - Colorado City’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Hildale - Colorado City’s results flag: PFOS, PFHxS and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Utah certifies closest to the area Hildale - Colorado City serves, or a kit by mail
The 3 labs Utah certifies closest to the area Hildale - Colorado City serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Southwest Utah Public Health Laboratory
St. George, UT · about 33 miles
Certified for bacteria, nitrate
St. George RWRF Laboratory
St. George, UT · about 35 miles
Certified for bacteria
Southern Utah University Water Laboratory
Cedar City, UT · about 47 miles
Certified for nitrate, lead and copper, metals, minerals and other inorganics
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Utah certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Utah’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 3 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOS
- Get the utility’s own reportHildale - Colorado City must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Utah Department of Environmental Quality, Division of Drinking Water, results from Jan. 3, 2020 to Oct. 1, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Utah Department of Environmental Quality, Division of Drinking Water, certified laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Utah Department of Environmental Quality, Division of Drinking Water, results from March 20, 2023 to Nov. 1, 2024, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID UTAH27006. Rebuilt from EPA data on Oct. 25, 2026.