Santa Clara City
EPA’s and Utah’s records have results for 38 contaminants in its water; 8 were found.
Serves 9,000 people · Surface water bought from another system · Veyo, UT
- Serves
- 9,000 people
- Connections
- 3,284
- Water source
- Surface water bought from another system
- Based in
- Veyo, UT
- County
- Washington
- Owner
- Local government
The ZIP code it serves
The short answer
Arsenic averaged above its legal limit’s level in 2023, with no violation recorded. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Jan. 8, 2024 to Jan. 22, 2025.
Lead and copper: EPA SDWIS monitoring periods ending 2012 to 2024.
Arsenic, fluoride and chromium (total): Utah’s own results, samples taken from Jan. 7, 2020 to Oct. 11, 2023, with EPA’s 2012 to 2019 file for earlier years.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium: EPA’s compliance monitoring file, samples taken from Oct. 17, 2012 to Aug. 12, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above the limit’s level, no violation recorded, 1 result
Arsenic
Comes from the source
What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A filter certified for it, at the tap you drink from, reduces it.
10.8 ppb
Highest yearly average, 2020 to 2023
Averaged by year, the highest was 10.8 ppb, in 2023, above EPA’s legal limit of 10 ppb. Its highest single sample was 14 ppb. That was also the latest year on file. EPA recorded no violation for arsenic at this utility since 2020.
How it’s judged
EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 9.3 ppb, in 2019.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
19.9 ppb
Highest sample, July 23, 2024; found in 3 of 4
The highest sample was 19.9 ppb, about twice EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 6 results
Uranium and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 36.8 ppb
Highest yearly average, 2012 to 2019 · 2019 average: 31 ppb · Forms or is added in treatment
Averaged by year, the highest was 36.8 ppb, in 2015, below EPA’s legal limit of 80 ppb. Its highest single sample was 46.4 ppb. In 2019, the latest year on file, its two samples averaged below the limit.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 7.5 ppb
Highest yearly average, 2012 to 2019 · 2019 average: 6.8 ppb · Forms or is added in treatment
Averaged by year, the highest was 7.5 ppb, in 2014, below EPA’s legal limit of 60 ppb. Its highest single sample was 10.3 ppb. In 2019, the latest year on file, its two samples averaged below the limit.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.9 ppm
Highest sample; found in 5 of 5 · 2016 average: 0.4 ppm · Comes from the source
The highest sample, in 2015, was 0.9 ppm, below EPA’s legal limit of 10 ppm. In 2016, the latest year on file, its two samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.5 ppb
Highest yearly average, 2016 · Comes from the source
Averaged by year, the highest was 1.5 ppb, in 2016, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.6 ppb
90th percentile, 2022 to 2024 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 0.6 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.13 ppm
Highest yearly average, 2021 · Forms or is added in treatment
Averaged by year, the highest was 0.13 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.2 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Chromium (total)
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction
For: Arsenic, Lead
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium, Lead Reduction
For: Arsenic, Uranium, Lead
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for: Arsenic; also lead, found below its limits
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Arsenic; also lead, found below its limits
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for: Arsenic; also lead, found below its limits
2 more filters
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Arsenic; also lead, found below its limits
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for lead only, found below its limits
Every filter certified for it
Disinfectant
Santa Clara City reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 to 2025 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 25 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Arsenic, fluoride and chromium (total) results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and uranium come from EPA’s file alone, which ends in 2019. Santa Clara City’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 8, 2024 to Jan. 22, 2025; Utah’s results run from Jan. 7, 2020 to Oct. 11, 2023; EPA’s compliance samples are from Oct. 17, 2012 to Aug. 12, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Santa Clara City’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0.6 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Santa Clara City’s results flag: arsenic and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Utah certifies closest to the area Santa Clara City serves, or a kit by mail
The 3 labs Utah certifies closest to the area Santa Clara City serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Southwest Utah Public Health Laboratory
St. George, UT · about 6 miles
Certified for bacteria, nitrate
St. George RWRF Laboratory
St. George, UT · about 7 miles
Certified for bacteria
Southern Utah University Water Laboratory
Cedar City, UT · about 50 miles
Certified for nitrate, lead and copper, metals, minerals and other inorganics
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Utah certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Utah’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with arsenic
- Get the utility’s own reportSanta Clara City must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Utah Department of Environmental Quality, Division of Drinking Water, results from Jan. 3, 2020 to Oct. 1, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Utah Department of Environmental Quality, Division of Drinking Water, certified laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID UTAH27016. Rebuilt from EPA data on Oct. 25, 2026.