Skip to content
TapBuff

City of Sansom Park

EPA’s and Texas’s records have results for 38 contaminants in its water; 6 were found.

Serves 5,359 people · Groundwater · Fort Worth, TX

Serves
5,359 people
Connections
1,706
Water source
Groundwater
Based in
Fort Worth, TX
County
Tarrant
Owner
Local government
The ZIP code it serves

76114

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 3 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 19 to Sept. 23, 2024.

Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), chromium (total), nitrate, arsenic and uranium: Texas’s own results, samples taken from Jan. 21, 2020 to Sept. 24, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

64.7 ppb

Highest sample, Sept. 23, 2024; found in 14 of 14

The highest sample was 64.7 ppb, about 6.5 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 41 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 14.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 41 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 85.7 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 97.3 ppb, in 2014, and EPA recorded violations in 2015, 2018 and 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.4 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.71 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.4 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.6 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.38 ppm, in 2014.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 8.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 5.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 8.8 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 23.1 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 23.5 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 6.4 ppb

Highest yearly average, 2021 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 6.4 ppb, in 2022, below EPA’s legal limit of 100 ppb. Its highest single sample was 8.5 ppb. In 2025, the latest year on file, it wasn’t found in any of its five samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppb, in 2016.

What handles it

About chromium (total)
Nitrate, Legal limit 10 ppm; highest 0.5 ppm

Highest sample; found in 42 of 42 · 2026 average: 0.066 ppm · Comes from the source

The highest sample, in 2024, was 0.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.26 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Texas utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

3 health-based violations since 2016, all for TTHM. The latest began Oct. 1, 2019.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2019 to Dec. 31, 2019, 92 ppbResolved
April 1, 2018 to June 30, 2018, 86 ppbResolved
Jan. 1, 2018 to March 31, 2018, 82 ppbResolved

Health-based violations only. 7 monitoring or reporting violations not shown.

Disinfectant

City of Sansom Park reported disinfecting with chlorine, not chloramine, at all 7 of its sampling points, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), chromium (total), nitrate, arsenic and uranium results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Sansom Park’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 19 to Sept. 23, 2024; Texas’s results run from Jan. 21, 2020 to Sept. 24, 2026.

Testing your own tap

City of Sansom Park’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Texas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Sansom Park’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Sansom Park’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Texas certifies closest to the area City of Sansom Park serves, or a kit by mail

The 3 labs Texas certifies closest to the area City of Sansom Park serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Tarrant County Public Health Laboratory

    Fort Worth, TX · about 6 miles

    Certified for bacteria

    (817) 321-4758

  • Pace Analytical Services, LLC -Dallas TX

    Fort Worth, TX · about 12 miles

    Certified for bacteria

    (817) 616-5030

  • Eurofins Xenco, LLC -Dallas

    Dallas, TX · about 31 miles

    Certified for bacteria

    (281) 240-4200

All 80 certified labs for Texas⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID TX2200071. Rebuilt from EPA data on Oct. 25, 2026.