Skip to content
TapBuff

City of Fort Worth

EPA’s and Texas’s records have results for 38 contaminants in its water; 15 were found.

Serves 955,900 people · Surface water · Fort Worth, TX

Serves
955,900 people
Connections
653,251
Water source
Surface water
Based in
Fort Worth, TX
County
Tarrant
Owner
Local government
The 48 ZIP codes it serves

76008, 76028, 76036, 76040, 76052, 76053, 76101, 76102, 76103, 76104, 76105, 76106, 76107, 76108, 76109, 76110, 76111, 76112, 76113, 76114, 76115, 76116, 76117, 76118, 76119, 76120, 76122, 76123, 76126, 76127, 76129, 76131, 76132, 76133, 76134, 76135, 76137, 76140, 76150, 76155, 76161, 76164, 76177, 76179, 76181, 76244, 76247, 76262

The short answer

None of the results here is above a limit in force today. PFHxS, PFOA and PFOS are above EPA’s new limit, which takes effect in 2029. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 23, 2023 to Jan. 24, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2015 to 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, nitrate, uranium and chromium (total): Texas’s own results, samples taken from Jan. 22, 2020 to Sept. 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFHxS, PFOA, PFOS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFHxA at 10.6 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 3 results

PFHxS

Comes from the source

Above EPA’s new limit (2029)

25.8 ppt

Highest sample, April 10, 2023; found in 8 of 20

The highest sample was 25.8 ppt, about 2.6 times EPA’s new limit of 10 ppt, which takes effect in 2029. EPA’s health goal is 10 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 16.1 ppt, also above it.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

8.3 ppt

Highest sample, April 10, 2023; found in 8 of 20

The highest sample was 8.3 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 5.9 ppt, also above it.

What handles it

PFOS

Comes from the source

Above EPA’s new limit (2029)

7.3 ppt

Highest sample, April 10, 2023; found in 8 of 20

The highest sample was 7.3 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 6.2 ppt, also above it.

What handles it

Below EPA’s limits, 9 results

Lead, arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Lead, Action level 15 ppb · health goal zero; 90th percentile 3.0 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 3.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 12.3 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 12.3 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 56 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 15.8 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 8.3 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 8.3 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 23 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.1 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.5 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.47 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.5 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.74 ppm. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.7 ppm, in 2012.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.2 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.25 ppb · Comes from the source

Averaged by year, the highest was 1.2 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.7 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.4 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 0.76 ppm

Highest sample; found in 78 of 78 · 2026 average: 0.42 ppm · Comes from the source

The highest sample, in 2023, was 0.76 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 11 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.2 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.6 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 1.6 ppb, in 2024, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.22 ppb, in 2017.

What handles it

About uranium
Chromium (total), Legal limit 100 ppb; highest yearly average 1.6 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 1.6 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 4.0 ppb. In 2026, the latest year on file, it wasn’t found in any of its six samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppb, in 2013.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 4.9 ppt

Highest sample, Jan. 24, 2024; found in 10 of 20 · Comes from the source

The highest sample was 4.9 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)8.3 ppt highest, found in 8 of 20 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)7.3 ppt highest, found in 8 of 20 samples. Details
PFHxS10 pptAbove EPA’s new limit (2029)25.8 ppt highest, found in 8 of 20 samples. Details
PFNA10 pptNot foundNot found in any of 20 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 20 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits4.9 ppt highest, found in 10 of 20 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Above EPA’s new limit (2029)1.61 at its highest sampling location, North Holly WTP
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Texas utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFHxA10.6 ppt16 of 20None covers it
PFBA10 ppt20 of 20None covers it
PFPeA6.2 ppt19 of 20None covers it
23 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: Total PFAS Reduction, PFOA Reduction, PFOS Reduction, Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFHxS, PFOA, PFOS, Lead, Arsenic

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Perfluorohexane Sulfonic Acid (PFHxS); Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: PFOA, PFOS, Lead, Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

City of Fort Worth reported adding chloramine before water enters its pipes, at all 5 of its sampling points, in its 2023 to 2024 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for the Long Term 2 Enhanced Surface Water Treatment Rule. It began March 1, 2021.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Long Term 2 Enhanced Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)March 1, 2021 to March 31, 2021Resolved

Health-based violations only. 1 monitoring or reporting violation not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, nitrate, uranium and chromium (total) results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Fort Worth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 23, 2023 to Jan. 24, 2024; Texas’s results run from Jan. 22, 2020 to Sept. 15, 2026.

Testing your own tap

City of Fort Worth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Texas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Fort Worth’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 3.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Fort Worth’s results flag: PFHxS, PFOA and PFOS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Texas certifies closest to the area City of Fort Worth serves, or a kit by mail

The 3 labs Texas certifies closest to the area City of Fort Worth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Tarrant County Public Health Laboratory

    Fort Worth, TX · about 3 miles

    Certified for bacteria

    (817) 321-4758

  • Pace Analytical Services, LLC -Dallas TX

    Fort Worth, TX · about 8 miles

    Certified for bacteria

    (817) 616-5030

  • Eurofins Xenco, LLC -Dallas

    Dallas, TX · about 27 miles

    Certified for bacteria

    (281) 240-4200

All 80 certified labs for Texas⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID TX2200012. Rebuilt from EPA data on Oct. 25, 2026.