Skip to content
TapBuff

White Rock Mobile Home Park

What EPA’s and Pennsylvania’s records show in this utility’s water: PFAS; nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
50 people
Connections
23
Water source
Groundwater
Based in
Lake City, PA
County
Monroe
Owner
Private
Hardness
Soft
The ZIP code it serves

18466

The short answer

1 result is above EPA’s legal limit, 2 more are above EPA’s new limit, which takes effect in 2029, and 1 more is above the health goal. The worst: Lead, above the action level. 2 health-based violations since 2016.

What handles it

What was found

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from March 18, 2025 to Dec. 30, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 1993 to 2013.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.3 ppm, for the period ending Dec. 31, 2015. None since is on file, so it is not counted as a current finding.

Arsenic, nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), chromium (total), fluoride and uranium: Pennsylvania’s own results, samples taken from Dec. 10, 2020 to May 29, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: PFOS, PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below.

EPA’s 2024 PFAS rule, compound by compound

PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)4.9 ppt highest, found in 4 of 4 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)6.1 ppt highest, found in 3 of 4 samples. Details
PFHxS10 pptNot foundNot found in any of 4 samples
PFNA10 pptNot foundNot found in any of 4 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 4 samples
PFBSIndex onlyBelow EPA’s limits3.9 ppt highest, found in 4 of 4 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

Above the legal limit1

Lead

Comes from pipes, often your own

Above the action level

17.9ppb

90th percentile, 2013

In the latest period, 9 in 10 homes sampled were at or below 17.9 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Above EPA’s new limit, which takes effect in 20292

PFOS

Comes from the source

Above EPA’s new limit (2029)

6.1ppt

Highest sample, June 18, 2025; found in 3 of 4

2025 average: 4.2 ppt

The highest sample was 6.1 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 4.2 ppt, for the year to Dec. 31, 2025: below Pennsylvania’s limit of 18 ppt and above EPA’s new limit of 4.0 ppt. Its only year on file is 2025, when its four samples averaged 4.2 ppt.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

4.9ppt

Highest sample, June 18, 2025; found in 4 of 4

2025 average: 3.4 ppt

The highest sample was 4.9 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 3.4 ppt, for the year to Dec. 31, 2025: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt. Its only year on file is 2025, when its four samples averaged 3.4 ppt.

What handles it

Above the health goal1

Arsenic

Comes from the source

Above the health goal

1.5ppb

Highest yearly average, 2021 to 2024

Averaged by year, the highest was 1.5 ppb, in 2024: below EPA’s legal limit of 10 ppb, but above its health goal of zero. Its highest single sample was 3.0 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.6 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits4

Nitrate

Comes from the source

Below EPA’s limits

2.3ppm

Highest sample; found in 8 of 8

2026 average: 1.3 ppm

The highest sample, in 2026, was 2.3 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its two samples averaged 1.3 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 2.5 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

2.4ppb

Highest yearly average, 2022 to 2025

2025: not found

Averaged by year, the highest was 2.4 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 5.7 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

0.65ppb

Highest yearly average, 2022 to 2025

2025: not found

Averaged by year, the highest was 0.65 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 1.3 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.77 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

PFBS

Comes from the source

Below EPA’s limits

3.9ppt

Highest sample, June 18, 2025; found in 4 of 4

2025 average: 3.0 ppt

The highest sample was 3.9 ppt, below EPA’s hazard index benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. Its only year on file is 2025, when its four samples averaged 3.0 ppt.

What handles it

6 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Fluoride
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFHxS
  • PFNA

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Lead Reduction, PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, PFOS, PFOA, Arsenic

    Other certifiers’ wording: Total PFAS Reduction; Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA); Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, PFOS, PFOA, Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

The best water filters for PFAS, ranked

The best reverse osmosis systems, ranked

Hardness

Soft, 52 mg/L (3 grains per gallon), at its one sampling point, in 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Revised Total Coliform RuleColiform or E. coli results required a detailed review of the system, and it or its fixes were not done on time.EPA: Treatment Technique, Level 2 Assessment (RTCR)Sept. 14, 2022—Resolved
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)July 12, 2022—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 78 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), chromium (total), fluoride and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. White Rock Mobile Home Park’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Pennsylvania’s results run from Dec. 10, 2020 to May 29, 2026; Pennsylvania’s PFAS results run from March 18, 2025 to Dec. 30, 2025.

Testing your own tap

White Rock Mobile Home Park’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

The 3 labs Pennsylvania certifies closest to the area White Rock Mobile Home Park serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Microbac Laboratories, Inc. - Pittston

    Pittston, PA · about 19 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (570) 348-0775

  • Princeton Analytical Labs

    Dunmore, PA · about 21 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (570) 209-7916

  • Eurofins Philadelphia - Wind Gap

    Wind Gap, PA · about 26 miles

    (215) 355-3900

Penn State Agricultural Analytical Services Laboratory: Drinking water test kits from many county Extension offices, mailed back to the lab overnight with payment. Packages cover bacteria and basic chemistry, with add-ons for nitrate, metals, lead, and mining or gas drilling concerns. The standard package of bacteria, pH and total dissolved solids is $60, or $70 with nitrate; bacteria alone is $40, nitrate $15 and lead $25. Drinking Water Testing, Penn State Agricultural Analytical Services Lab.

All 108 certified labs for Pennsylvania

Sources

PWSID PA2450038. Rebuilt from EPA data on Oct. 18, 2026.